Anyone know of a method of converting a vk dizzy to hall effect or any other options?
I see them brand new but theyre $600 :/
Hall Effect dizzy for Vk
Re: Hall Effect dizzy for Vk
The vk dizzy should be a reluctor type dizzy already any particular reason for a hall effect one? If it's for an Delco conversion your better off staying with the reluctor pickup and use a camira ignition module otherwise you will have to go to the more expensive 304 ignition module
Re: Hall Effect dizzy for Vk
Its for a possible microtech conversion. Ones come up real cheap. Would be silly not too.
I just couldnt find the right section for it. Please move the thread if this is the wrong area
I just couldnt find the right section for it. Please move the thread if this is the wrong area
Re: Hall Effect dizzy for Vk
How about these
https://www.efihardware.com/products/22 ... istributor
https://www.efihardware.com/products/22 ... f-and-sync
And also gives you sequential option if you want
https://www.efihardware.com/products/22 ... istributor
https://www.efihardware.com/products/22 ... f-and-sync
And also gives you sequential option if you want
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Hall Effect dizzy for Vk
I assume your referring to a 6 cylinder VK ?
surely the microtech can work with the camira ignition module ?
surely the microtech can work with the camira ignition module ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Hall Effect dizzy for Vk
It should shouldn't it...
May i ask what route i take to purchase those Bosch pieces for a dissy conversion?
Do i call them up or go to a dealer
May i ask what route i take to purchase those Bosch pieces for a dissy conversion?
Do i call them up or go to a dealer
Re: Hall Effect dizzy for Vk
You can buy them straight off the web site a lot of the guys on here have bought from these guys. Connectors pins and all sorts of stuff so they should be pretty good like holden202 said I just took a stab in the dark and thought it was a 6 cylinder but there is a v8 chopper wheel there as well if it's v8 also with the reference point for sequential injection