808_comms_mod_usb

Ecu Hardware Modifications
Post Reply
fad2629
Posts: 32
Joined: Thu Dec 11, 2014 4:58 am

808_comms_mod_usb

Post by fad2629 »

Hi.
Does anyone advise - will it work?
Attachments
delco_808_comms_mod_usb.JPG
delco_808_comms_mod_usb.JPG (162.81 KiB) Viewed 5590 times
fad2629
Posts: 32
Joined: Thu Dec 11, 2014 4:58 am

Re: 808_comms_mod_usb

Post by fad2629 »

in these threads is discussed this issue, but poorly understood, and no circuits.
http://pcmhacking.net/forums/viewtopic.php?f=11&t=927
http://pcmhacking.net/forums/viewtopic.php?f=11&t=935
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: 808_comms_mod_usb

Post by antus »

It looks like an off the shelf USB circuit edited over the top of my pic of an 808 (originally showed a max232 for RS232 interface posted here in 2009 http://pcmhacking.net/forums/viewtopic. ... +mod#p1743 ). It probably can work. Make sure your ftdi chip is genuine.. current drivers dont work with clones (which hopefully has pushed most the fakes out the market by now). If it doesnt work complain to your FTDI chip provider. Also need to run an OS with high speed support (such as 12P) on the 808.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
fad2629
Posts: 32
Joined: Thu Dec 11, 2014 4:58 am

Re: 808_comms_mod_usb

Post by fad2629 »

thank you, antus
Post Reply