Custom Flange - 3d printing, CAD, Sand Casting

Ecu Hardware Modifications
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Custom Flange - 3d printing, CAD, Sand Casting

Post by Jayme »

currently reading up on this guys oil burner designs.... its all very interesting to someone like me who hasnt ever so much as looked at a real furnace :P

http://www.backyardmetalcasting.com/oilburners01.html

as the pages go on, you can see his newer generation designs.
BennVenn
Posts: 475
Joined: Fri Mar 04, 2016 10:35 am
cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
Location: Windellama, NSW
Contact:

Re: Custom Flange - 3d printing, CAD, Sand Casting

Post by BennVenn »

That is such a good idea!!!!!!!!! I've got a spare pitbike carby I could try. Wonder how rich you'd need to make it to not have a flame travel back up to the carby. Would 14:1 AFR support a flame without compression?
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Custom Flange - 3d printing, CAD, Sand Casting

Post by VL400 »

Couple of youtube subs I have do a bit of casting. This guy is building a (big) boat in his front yard (well worth checking out even if you dont want to watch the casting vids) .. https://www.youtube.com/user/submarineboat

And this guy needs fast forward lots of the time, but has a series on building an oil or gas fired setup .. https://www.youtube.com/channel/UCyjwQ6 ... EcWGboSU3g
BennVenn
Posts: 475
Joined: Fri Mar 04, 2016 10:35 am
cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
Location: Windellama, NSW
Contact:

Re: Custom Flange - 3d printing, CAD, Sand Casting

Post by BennVenn »

Supercharging is now on hold :-(

I need to get the Delco TBI all nice and neat for a roadworthy. I'm taking a month off work and need a car to post stuff for the online store. So! TBI will be converted to a returnless setup, Fuel system relocated beside the fuel tank, Original fuel line will be used to supply the ~12psi to the TBI. Going to need some kind of fuel accumulator to make up for the thin stock line. And need to find a regulator that will regulate 12psi. Carby ones seem to max out at 7-9psi, EFI ones regulate poorly below 1.5bar...

Also swapping out the steam pipe + 10mm plate homemade TBI adaptor with a cast one. Here's the patterns:
20160404_064044.jpg
20160404_064037.jpg
A nice simple core for this one. I've sanded the 3d print and put a few coats of epoxy clear, nice and shiney! All draft angles are good and even put my name on the casting. See how detailed I can go with this sand. If it doesn't rain this afternoon, I'll post some casting pics.
Post Reply