Digital pulse adjuster

Ecu Hardware Modifications
Posts: 71
Joined: Tue May 27, 2014 7:37 am

Digital pulse adjuster

Postby ben044 » Sun Nov 05, 2017 7:49 pm

Does anyone know where i can get one of these. Pulse adjuster and hand controller. The hand controller is discontinued but they still make the pulse adjuster. The stupid thing is u need the hand controller to adjust the settings in the pulse adjuster.
Attachments
Screenshot_20171105-182235.png
Screenshot_20171105-175959.png
Last edited by ben044 on Mon Nov 06, 2017 5:49 am, edited 1 time in total.

Posts: 2564
Joined: Thu Apr 09, 2009 12:31 pm

Re: Digital pulse adjuster

Postby immortality » Mon Nov 06, 2017 5:44 am

Looks like a Jaycar product.

Posts: 71
Joined: Tue May 27, 2014 7:37 am

Re: Digital pulse adjuster

Postby ben044 » Mon Nov 06, 2017 5:51 am

It is a jaycar item but u can only get the pulse adjuster. They have discontinued the hand controller and thats what u need to make adjustments

User avatar
Posts: 4861
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Digital pulse adjuster

Postby delcowizzid » Tue Nov 21, 2017 12:50 pm

Was at my local jaycar today they have 2 hand controller kits in stock on the shelf $81nzd
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Site Admin
User avatar
Posts: 5710
Joined: Sat Feb 28, 2009 8:34 pm

Re: Digital pulse adjuster

Postby antus » Thu Nov 23, 2017 8:10 am

The Jaycar kit is of the silicon chip project. See http://www.siliconchip.com.au/Issue/200 ... e+Adjuster and the next item in the menu on the left hand side.
You should be able to buy that article and/or they have the source code down the bottom left for $3. If you have the tools you'd be able to set it up before flashing the MCU, negating the need for the hand controller. Or else, look at the protocol in the source use a PC serial terminal to talk to it. I'd hazard a guess and say it'd be a simple text based protocol and the reason they dont have the hand controler is because you dont need it.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Site Admin
User avatar
Posts: 5710
Joined: Sat Feb 28, 2009 8:34 pm

Re: Digital pulse adjuster

Postby antus » Fri Nov 24, 2017 8:13 am

I was curious how this device works so I spent the $3 from silicon chip to get the source code. It looks like all the logic is in the main board, which appears to contain 2 PIC processors. There looks to be a shared eeprom in the device and one pic drives the hand controller and updates the eeprom, and the other pic provides the output. This would explain why the cable between the two has so many pins. I think the buttons and the display are wired to and driven from the main device which is running the show. Buttons and an lcd in a box. Depending on the quality of the docs provided it probably wouldnt be to hard to connect an off the shelf couple of buttons and display to the main device if you cant get the controller kit. But it looks like serial comms from a PC is out.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 4116
Joined: Mon Jan 04, 2010 10:23 am

Re: Digital pulse adjuster

Postby The1 » Thu Nov 30, 2017 4:57 pm

I seen this one anyone tried it?
https://hmbe.com.au/speedometer-calibratior

Site Admin
User avatar
Posts: 5710
Joined: Sat Feb 28, 2009 8:34 pm

Re: Digital pulse adjuster

Postby antus » Sat Dec 02, 2017 1:27 pm

That one you post looks decent.

Heres a pic of the board in the first one, which shows the guts a bit clearer. I cant tell if there are 2 pics in there or not, maybe not... that IC in the socket at the front could have a microchip logo on it but it looks different to the one at the back which definately is a pic.
Attachments
2472_10mg.jpg
2472_10mg.jpg (54.1 KiB) Viewed 2032 times
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Return to Hardware Modification and Development

Who is online

Users browsing this forum: No registered users and 1 guest