Spark only bin to turn 808 into programmable ignition ecu

Thought Of A Good Feature To Add Tell Everyone About It Here
VNracer34G
Posts: 345
Joined: Sun Apr 05, 2009 1:07 pm
cars: VN V6 Production Saloon
Location: Gisborne NZ

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by VNracer34G »

The man got to the track minus stockcar last night. Too late to do much about it he investigated a bit of a rumble, turned out to be a munted front bearing in the gearbox and a cracked case - bugger!

As for the last couple of posts i think i'll start by going over this week with my timing light and make a TDC mark on the ballancer and see how much....if any...advance its getting and go from there - i really don't feel like rewiring it but what the hell if its gotta be done, mind you it was wired up by a pro auto electrician
Build it, Race it, Break/Bend it ; Repeat.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by delcowizzid »

the aussie guys used to just run module only and lock the timing at 28 degrees by moving the cas bit dodgy really
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by Holden202T »

what you saying us aussies are dodgy ??? :afro:
yoda69
Posts: 1215
Joined: Sun Mar 15, 2009 10:20 am
cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual
Location: Geelong, VIC

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by yoda69 »

I'll go back to the original topic.
I've just started on spark only into the 808 on my 351 Cleveland.
It has an reluctor type distributor which I have removed the mechanical and vacuum advance from today, it has a small and large lug from the reluctor and them marked A & B, hopefull small is negative and large is positive as per Holden202's post elsewhere.

Things I have so far are:
* Distributor
* 808
* Camira wiring
* MAP Sensor

Things to get
* Camira ignition module
* Camira ignition coil

Next step is to fit it all, modify a 4cyl netres as per other posts for a V8 and modify a bin.
Was thinking originally to base of a 5 Litre spark map and adjust ref angle to 10degrees.

Is there anything else I need to get started?
I know VSS, TPS, ECT and IAT would be nice, but at this stage would just like to get it to run and I can set the spark changes in the ECT and IAT all to zero.

yoda69
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by Holden202T »

sounds like you've pretty much covered all the bases

although a holden v8 spark map might be too good for a ford ;)
yoda69
Posts: 1215
Joined: Sun Mar 15, 2009 10:20 am
cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual
Location: Geelong, VIC

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by yoda69 »

Thanks Holden202.
I agree with the spark map, but I have to start somewhere.
Will let you all know how I go, I'm sure there will be plenty more questions.

yoda69
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by Holden202T »

i think the spark table will be fine, i was just having a go at the ford :D
Mechcano
Posts: 19
Joined: Wed Jan 06, 2010 3:45 pm

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by Mechcano »

yoda69

I have been running my 360 Chrysler V8 with igniton only for 12 months now without any problems, using the setup you intend using.

Hope the information below is of use to you. :thumbup:

Below is a link for the wiring diagram that i have used.
http://home.wildit.net.au/mich/pics/Vid.GIF

And the current bin file that i am running(LPG tune).
$5D_360_10F.zip
Created with TP4 $5d bin
(8.91 KiB) Downloaded 534 times
yoda69
Posts: 1215
Joined: Sun Mar 15, 2009 10:20 am
cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual
Location: Geelong, VIC

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by yoda69 »

Mechcano,
Thanks for your input, it is much appreciated.
So far have managed to get the camira module mounted to the distributor and wired up.

Initially I'll try without the coolant sensor, but plan on getting a later model thermostat housingt that has provision for a sensor on it.

If your map is set for LPG it's proabably has a bit too much advance for me, but I'll compare it with a Holden V8 and see.

Thanks again,
yoda69
Mechcano
Posts: 19
Joined: Wed Jan 06, 2010 3:45 pm

Re: Spark only bin to turn 808 into programmable ignition ecu

Post by Mechcano »

yoda69

Here is a a bin more suited to petrol.
360_10A.bin
(16 KiB) Downloaded 521 times
and the XDF file to suit.
xxxx2 5d mod2.xdf
(128.38 KiB) Downloaded 529 times
Post Reply