GM You done f*cked UP with programming

A place For General Chit Chat Etc
User avatar
Posts: 2289
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: GM You done f*cked UP with programming

Postby Gareth » Wed Sep 15, 2021 7:45 am

In-Tech wrote:Luckily I have an ~265mb folder with a ton of modules that gets me out of trouble on most stuff, of course doesn't help when I need something I don't have :(


What about we start a public file library? or is there one already I'm not aware of?
According to chemistry, alcohol is a solution...

User avatar
Posts: 2501
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: GM You done f*cked UP with programming

Postby Tazzi » Wed Sep 15, 2021 8:02 am

ironduke wrote:I'm curious.. What happens if you type your vin into the sps calibration page? https://tis2web.service.gm.com/tis2web
Does it show cal info there or is that messed up to? Curious if that can be a way to double check to make sure its on gm's end of things.. I've wanted to do that next time it happens to me but now since I thought of that it's been good plus I've had a non sps2 last coupla weeks with big jobs..

Yeah it shows fine in the SPS cal page, and it works fine in original SPS which I still have access to. But since I know I am being forced to the SPS2 soon, I would like it working correctly before migrating full time to it.

julespatch wrote:Tazzi did you change your region to Australia? I noticed it was set to NA on initial setup.

Oh, mine does say NA, not sure how to change that? Says I need to log out to change but then I have no option to change it :lol:

Gareth wrote:What about we start a public file library? or is there one already I'm not aware of?

I don't think there is, but I believe this would be good for ECUs and TCMs, and categorize them based on ECU type and Operating systems.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

Posts: 310
Joined: Thu Feb 13, 2020 11:32 pm

Re: GM You done f*cked UP with programming

Postby ironduke » Wed Sep 15, 2021 8:13 am

This public library, is this going to be just a big collection of sps cache files?

User avatar
Posts: 2501
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: GM You done f*cked UP with programming

Postby Tazzi » Wed Sep 15, 2021 8:57 am

ironduke wrote:This public library, is this going to be just a big collection of sps cache files?

Organized cache files, otherwise its too crazy.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

User avatar
Posts: 2289
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: GM You done f*cked UP with programming

Postby Gareth » Wed Sep 15, 2021 9:52 am

How much space do you think it could take up?
According to chemistry, alcohol is a solution...

User avatar
Posts: 2501
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: GM You done f*cked UP with programming

Postby Tazzi » Wed Sep 15, 2021 9:59 am

Gareth wrote:How much space do you think it could take up?

If its just ECUs and TCMs, it wont be more then 1gb.

If its anything else, this can be many hundreds of gigs since things like radios and clusters can have gigs with of firmware updates.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

User avatar
Posts: 2289
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: GM You done f*cked UP with programming

Postby Gareth » Wed Sep 15, 2021 10:23 am

I'm happy to help arrange this as long as Antus approves the room required..

What would be the best way to arrange files? By vehicle or by part number?
According to chemistry, alcohol is a solution...

User avatar
Posts: 2289
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: GM You done f*cked UP with programming

Postby Gareth » Wed Sep 15, 2021 10:24 am

This is the existing library for the ALDL Holden stuff - viewtopic.php?f=7&t=3

As you can see it lists by vehicle
According to chemistry, alcohol is a solution...

Posts: 394
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: GM You done f*cked UP with programming

Postby In-Tech » Wed Sep 15, 2021 12:15 pm

Gareth wrote:I'm happy to help arrange this as long as Antus approves the room required..

What would be the best way to arrange files? By vehicle or by part number?

Hiya, I would think by part number since one part number is used in many different vehicles. Here's a small screenshot example of a few in order numerically.
Modules_B.JPG

User avatar
Posts: 2501
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: GM You done f*cked UP with programming

Postby Tazzi » Wed Sep 15, 2021 2:31 pm

In-Tech wrote:Hiya, I would think by part number since one part number is used in many different vehicles. Here's a small screenshot example of a few in order numerically.
Modules_B.JPG

Personally I would still be grouping by ECU/TCM type and corresponding/compatible operating systems.

It also helps for reverse engineering to identify what cals match which vehicles and how their differences correlate to another car. :thumbup:

Or at least, have some sort of filtering system which allows typing in an ECU type and Operating system to display compatible calibrations and their description (engine/engine diag, system ect).
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

PreviousNext

Return to Off Topic

Who is online

Users browsing this forum: No registered users and 6 guests