while we are on the subject of big and small i had to post this man its a whopper
would a delco run this engine?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: would a delco run this engine?
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: would a delco run this engine?
isn't that the turbo off that diesel boat engine!!!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: would a delco run this engine?
one would think so but no its off an LS1 i think LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: would a delco run this engine?
ok i think this could be the boat engine one LOL wouldnt want to get sucked in it may even be some sort of pump not turbo
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: would a delco run this engine?
A 42 cyl radial with 8757 cui of Russian origin (Zvesda / St. Petersburg)
Specs are:
42 cylinders heptagonal-star/6 cylinder rows
Diameter 160 mm, stroke 170 mm, capacity: 143.500 ccm (8.757 cui) (143 litre!!!!!)
7 over head camshafts driven by shafts, central steer time adjustment
4 valves/cylinder, 168 valves operated by roller rocker arms one cam moves an exhaust valve and an inlet valve
Rotational speed: up to a maximum of 2500 rpm
Torque: about 15000 Nm (approx 11063 ft/lb)
Power: about 4500 kW (approx 6034 hp)
Fuel consumption: 205 g/kWh resp. About 800 litres diesel/h
Direct injection 9-hole injectors
Decentralized fuel injection pump, per cylinder p ~ 1.000 bar
Turbo compound: 1 step axial turbine and 1 step radial blower (p ~ 2,1 bar)
Joined with crankshaft via 3 parallel hydrodynamic couplings
Compressed air start system is at work with 150 bar compressed air on 2 cylinder banks (12 cylinders)
Dimensions: diameter 1.600 mm, length ~ 2.000 mm"
Or, why not this?
Specs are:
42 cylinders heptagonal-star/6 cylinder rows
Diameter 160 mm, stroke 170 mm, capacity: 143.500 ccm (8.757 cui) (143 litre!!!!!)
7 over head camshafts driven by shafts, central steer time adjustment
4 valves/cylinder, 168 valves operated by roller rocker arms one cam moves an exhaust valve and an inlet valve
Rotational speed: up to a maximum of 2500 rpm
Torque: about 15000 Nm (approx 11063 ft/lb)
Power: about 4500 kW (approx 6034 hp)
Fuel consumption: 205 g/kWh resp. About 800 litres diesel/h
Direct injection 9-hole injectors
Decentralized fuel injection pump, per cylinder p ~ 1.000 bar
Turbo compound: 1 step axial turbine and 1 step radial blower (p ~ 2,1 bar)
Joined with crankshaft via 3 parallel hydrodynamic couplings
Compressed air start system is at work with 150 bar compressed air on 2 cylinder banks (12 cylinders)
Dimensions: diameter 1.600 mm, length ~ 2.000 mm"
Or, why not this?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: would a delco run this engine?
i've watched alot of them on youtube, its amazing what comes out of some peoples heads
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: would a delco run this engine?
These guys must have some pretty healthy sponsors.