fitting a vt ss with trac control???
-
vnsswithcam
- Posts: 79
- Joined: Sat Mar 20, 2010 1:20 pm
- cars: vt ss commodore
- Location: penrith n.s.w
fitting a vt ss with trac control???
has anyone ever fitted trac control to a vt ss series 1 it has abs but no trac and i want to install it and would like to know if i can just get the vx abs module with trac control fit it and the console button get my tech 2 and programm it would this work? anyone done this before?
one point twenty one jiggawatts!!!! great scott!!!
-
TTVN
- Posts: 194
- Joined: Tue Jun 30, 2009 10:01 pm
- cars: TT 355 VN, Rearmount turbo 355 vp, cammed 355 hj60 landcruiser, vx clubby n efilive VZ ls1 wagon
Re: fitting a vt ss with trac control???
the harness and connectors are different between the t/c and non t/c abs units
the t/c units also have an extra hose that goes to the rear so what you really need is all the junk , abs unit , brake lines , dash/bay harness to even get started with it and then fit your switches etc
big bloody job for little gain imo
the t/c units also have an extra hose that goes to the rear so what you really need is all the junk , abs unit , brake lines , dash/bay harness to even get started with it and then fit your switches etc
big bloody job for little gain imo
-
yoda69
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: fitting a vt ss with trac control???
Additionally the V8 tunes can not process the torque reduction requests as far as I know, VL400 may be able to confirm this.
Holden never offered TC on the Holden V8's, it wasn't introduced on the V8 until the GEN3 was launched in VT Series 2, and that is a completely different ECU.
yoda69
Holden never offered TC on the Holden V8's, it wasn't introduced on the V8 until the GEN3 was launched in VT Series 2, and that is a completely different ECU.
yoda69