Couldnt really find a section for this..

A place For General Chit Chat Etc
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Couldnt really find a section for this..

Post by The1 »

thats neet. :thumbup:
jxx
Posts: 153
Joined: Tue Oct 25, 2011 7:47 pm
cars: To many
Location: Vic

Re: Couldnt really find a section for this..

Post by jxx »

festy wrote:Also I don't know if this has been mentioned in the thread somewhere already, but if you swap the high and low bytes of word 3 (i.e. DF20 -> 20DF) the displays switch to imperial (MPH, MPG etc).
Iirc it fails in diag mode with that byteswap.
To many pages to read through but it was discovered at some point along the journey.
grk747
Posts: 1
Joined: Mon Jun 14, 2021 8:41 pm

Re: Couldnt really find a section for this..

Post by grk747 »

festy wrote:I wasn't planning on pulling the chip out of the cluster to do it - the tool I made just plugs into the cluster's programming port.
here's a quick demo https://youtu.be/amYQ7H3FrKo

I think I've still got a couple of spare CAT2444 chips here somewhere. I'll have a look for them tomorrow.
What's the 'ebay thingy' you mentioned?

Wouldn’t happen to be able to show the tool you made? Would like to make one myself. Thanks!
jxx
Posts: 153
Joined: Tue Oct 25, 2011 7:47 pm
cars: To many
Location: Vic

Re: Couldnt really find a section for this..

Post by jxx »

grk747 wrote:Wouldn’t happen to be able to show the tool you made? Would like to make one myself. Thanks!
Planning on winding a few hundred thou off the mang mobile?
Post Reply