Couldnt really find a section for this..
Re: Couldnt really find a section for this..
thats neet.
Re: Couldnt really find a section for this..
Iirc it fails in diag mode with that byteswap.festy wrote:Also I don't know if this has been mentioned in the thread somewhere already, but if you swap the high and low bytes of word 3 (i.e. DF20 -> 20DF) the displays switch to imperial (MPH, MPG etc).
To many pages to read through but it was discovered at some point along the journey.
Re: Couldnt really find a section for this..
festy wrote:I wasn't planning on pulling the chip out of the cluster to do it - the tool I made just plugs into the cluster's programming port.
here's a quick demo https://youtu.be/amYQ7H3FrKo
I think I've still got a couple of spare CAT2444 chips here somewhere. I'll have a look for them tomorrow.
What's the 'ebay thingy' you mentioned?
Wouldn’t happen to be able to show the tool you made? Would like to make one myself. Thanks!
Re: Couldnt really find a section for this..
Planning on winding a few hundred thou off the mang mobile?grk747 wrote:Wouldn’t happen to be able to show the tool you made? Would like to make one myself. Thanks!