3D Printing.. Woos and Woes!
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 3D Printing.. Woos and Woes!
Some other impressive stuff by the same guy too:
http://www.thingiverse.com/ericthepoolboy/designs/
http://harrelleric.wixsite.com/eric-harrell
http://www.thingiverse.com/ericthepoolboy/designs/
http://harrelleric.wixsite.com/eric-harrell
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 288
- Joined: Wed Jul 01, 2009 7:18 pm
- cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.
Re: 3D Printing.. Woos and Woes!
How did this go, now that this thread has popped back up ?BennVenn wrote:OK, I'll be building up a manifold to interface the supercharger with the left and right heads of the VW. I'll start a thread when I get my AMR500. Hopefully next week!!
Re: 3D Printing.. Woos and Woes!
New printing surface that Im extremely impressed with. Prints and sticks to it great, then peels off just as easy.
The stuff is called LokBuild: http://www.lokbuild.com/
Just got my kickstarter version sent to me.. and its been great!.
The stuff is called LokBuild: http://www.lokbuild.com/
Just got my kickstarter version sent to me.. and its been great!.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: 3D Printing.. Woos and Woes!
Did a quick design for VS Commodore Windscreen wiper motor arm bushings and cap, mine were all gone lol
https://www.tinkercad.com/things/gSzcMn ... j2bVCvfDs=
https://www.tinkercad.com/things/gSzcMn ... j2bVCvfDs=
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 3D Printing.. Woos and Woes!
The company I am using to print my project do various different alloys including aluminium. Would be awesome to print a manifold
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 3D Printing.. Woos and Woes!
The1, can you post a screen shot? That link is asking for auth.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: 3D Printing.. Woos and Woes!
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs
Re: 3D Printing.. Woos and Woes!
yes the link above, ive just revised it a bit, here's the final product, working, use stiff wire through the holes to prevent it coming off, used superlube on the joints, the item itself has changes inside so it's a press fit, i just did it in a vice slowly, i printed it with abs, pla can be just as strong but brittle.
- Attachments
-
- IMG_20171004_204512_HHT.jpg (123.05 KiB) Viewed 7109 times
-
- IMG_20171004_204505.jpg (123.74 KiB) Viewed 7109 times