Immortalities totally random thread

[Dylan]

Gee that was quick can't get stuff interstate here that quick sometimes. Have you got on the data for the MAF? I could screen shot it over the weekend if you need it.

[immortality]

Yeah it wasn't bad. Sometimes it takes ages.

I ordered parts from an out of town supplier recently and they arrived overnight where as most places in Auckland generally take 2-3 days to arrive and they are local.

Can I have a look at at that data please. I have some numbers but it's always good to compare

[Dylan]

1500hz 1.570313 g/s
1625hz 1.851563 g/s
1750 2.171875
1875 2.554688
2000 2.976563
2125 3.445313
2250 3.945313
2375 4.484375
2500 5.070313
2625 5.726563
2750 6.429688
2875 7.195313
3000 8.023438
3125 8.906250
3250 9.835938
3375 10.835938
3500 11.898438
3625 13.046875
3750 14.273438
3875 15.585938
4000 16.992188
4125 18.523438
4250 20.140625
4375 21.859375
4500 23.664063
4625 25.570313
4750 27.578125
4875 29.710938
5000 31.929688
5125 34.257813
5250 36.687500
5375 39.250000
5500 41.960938
5625 44.867188
5750 47.914063
5825 51.117188
6000 54.414063
6125 57.953125
6250 61.593750
6375 65.382813
6500 69.375000
6625 73.476563
6750 77.781250
6875 82.242188
7000 86.812500
7125 91.664063
7250 96.625000
7375 101.765625
7500 107.156250
7625 112.671875
7750 118.429688
7875 124.382813
8000 130.460938
8125 136.843750
8250 143.343750
8375 150.015625
8500 156.953125
8625 164.023438
8750 171.375000
8875 178.945313
9000 186.664063
9125 194.804688
9250 203.101563
9375 211.656250
9500 220.539063
9625 229.601563
9750 239.015625
9825 248.679688
10000 258.515625
10125 268.773438
10250 279.234375
10375 289.984375
10500 301.156250
10625 312.546875
10750 324.398438
10825 336.617188
11000 349.078125
11125 362.218750
11250 375.656250
11375 389.523438
11500 404.039063
11625 418.890625
11750 434.437500
11825 450.554688
12000 467.046875

[Dylan]

they don't keep there spacing when typed here, frequency on the left, grams on the right.

That's the read from the PCM that MAF come from.

[immortality]

Awesome. Thanks for typing all that out. That is a bit different to the data I have I think but it looks to be fairly close to the V6 MAF up to 10000hz so it shouldn't require to much adjustment to get the it running sweet with the L67.

[immortality]

Some more goodies arrived this morning

Haven't had time to make up a tool at work yet. Hopefully have something made next week.

[immortality]

It's play with the diff day.

Pressed bearing onto the new centre, fitted the crown wheel etc. New bearings/seals in the hubs too. Then start setting it all up (I put the pinion in last week some time but no pics). ATM it's all just a dummy assembly to check it all over. No pinion seal or O ring seals in the hubs ATM until I'm happy with it all. Gave it all a coat of paint too last week.

Starting to assemble it and check/set the back lash.

Working on the floor just wasn't working out to well so I mounted the sucker on my home made engine stand.

[immortality]

And probably the most critical part, the wear pattern.

What do the diff experts think? Back lash is about .007" (Motive Gear recommend .008") and the wear mark is probably a touch high up to tooth?

[immortality]

Yum..

Something I cobbled together on the weekend, Dutch Apple Tart

(It is about the only thing I can bake)

[immortality]

So this todays effort is this,

After seeing a thread on the L67 Torque forum where another member had done the same thing and lost a heap of boost I though I'd do mine to compare and it looks like the same result. Lost a heap of boost but as a bonus the air intake temps are lower. Unfortunately I forgot to hit record on the logger so I have no data at this stage. Going out to do another run shortly to get some numbers. Car feels totally different though, certainly lost a little throttle response.