Immortalities totally random thread

A place For General Chit Chat Etc
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Immortalities totally random thread

Post by immortality »

Thinking back, this car has always had a slight imbalance between banks on the fuel trims, wondering now if this car has suffered from a slight miss-fire for a very long time. Now the question is was it the spark plugs or the leads? when I removed the lead on the number 3 pot the spark plug lead terminal stayed on the plug and the crimp fitting looked rather crap, I'm sure I removed the lead by holding the boot and not pulling on the cable so there was no reason for the lead to pull apart like that.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Immortalities totally random thread

Post by The1 »

Some engines run quite leaner or richer in one pot or two, some have slightly different timing, one pot on my engine runs leaner than the rest, no4 cyl, no6 and 5 have slightly advanced timing, I was able to muck with the per cylinder timing and picked up a hp or two as well, I had the engine warmed up, then let the engine idle for 5-10mins, then use the plug as a guide for lean/rich and timing difference vs each pot.

This is assuming that all the injectors, leads, coils etc are all working properly so that the difference per cylinder is minimal.
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Immortalities totally random thread

Post by immortality »

Car got a good run on this week, ended up doing just under 600km for the day and the engine ran really well, the suspension was a different story....

Just fitted new front struts, strut bushes and bearings which has definitely got rid of one knock but now it has developed another although I think it's a sway bar bush as it only happens when steering is near full lock going in/out of a driveway etc.

The passenger side top strut bush was totally shagged, the steel inner was floating in the rubber. The bearing on the other side fell apart to when I took the tension of the spring.

New KYB strut.
0-02-06-49c9ca3627a44c6340d08b912e79a8acebed584165aeb41c939c053437b820f8_full.jpg
Old top strut bush
0-02-06-7b003d585a2a044b5880b13ecf7c7f14028647e43997aae9f7ff5709597eed41_full.jpg
Nice even strut top gap (was about 10mm with stuffed bush)
0-02-06-a79a4dbc1987b4317fe8778a9190e950eec6814c4727bd27f2039bf00f6387a2_full.jpg
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Immortalities totally random thread

Post by immortality »

So I finally got around to a job that should have been done 18 months ago :roll: , never mind, it's done now.
0-02-06-a919a3f4ec5212940c1c3a4c0979475c3c6b2ad0e880a63729f26541d9e19cb4_full.jpg
With the 25mm blower spacer fitted there just over 5mm clearance between the bottom of the strut brace and the fuel rail bracket on top of the blower.
Can anybody see what is fitted incorrectly?

With these most recent maintenance items checked off the car is feeling much nicer to drive again.
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Immortalities totally random thread

Post by immortality »

Just finished the front sway bar chassis bushes. Much more pleasant job in this evening weather.
User avatar
psyolent
Posts: 1575
Joined: Tue Apr 26, 2011 9:52 pm
cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car

Re: Immortalities totally random thread

Post by psyolent »

ah. the knock. yes catherines VX has that knock as well.
i replaced the Z bar bushes on the front as they were completely flogged out and fell apart on me when i removed them.
all the BJs and other bushes in it appear OK but i've not checked the swaybar chassis bushes or the link pins. might have a look at them. that said i did the tower bearings and struts about 18 months ago.
Cheers,
Greg aka Sir Burnie Tanington

VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: Immortalities totally random thread

Post by L67PSI »

Isn't that a V8 top panel over radiator?
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Immortalities totally random thread

Post by immortality »

psyolent wrote:ah. the knock. yes catherines VX has that knock as well.
i replaced the Z bar bushes on the front as they were completely flogged out and fell apart on me when i removed them.
all the BJs and other bushes in it appear OK but i've not checked the swaybar chassis bushes or the link pins. might have a look at them. that said i did the tower bearings and struts about 18 months ago.
We work so hard and they don't even notice the improvements....
L67PSI wrote:Isn't that a V8 top panel over radiator?
Yep, I've just trimmed the end off by the MACE cold air intake and radiator cap.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Immortalities totally random thread

Post by delcowizzid »

My vx has a knock that you can feel in your foot the body brace is loose and bangs on the bolts to lazy to lean under and tighten the 4 bolts lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
psyolent
Posts: 1575
Joined: Tue Apr 26, 2011 9:52 pm
cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car

Re: Immortalities totally random thread

Post by psyolent »

ah, those triangulation braces in the engine bay. i'll had a look at those delco. ta.
Cheers,
Greg aka Sir Burnie Tanington

VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Post Reply