water resistant /proof ecu housing

A place For General Chit Chat Etc
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: water resistant /proof ecu housing

Post by Dylan »

Well worth a look, great IP rating too.

https://www.brenclosures.com.au/pc.htm
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: water resistant /proof ecu housing

Post by vlad01 »

Just an IP68 rated electrical box. I had one for a wireless link that used a linksys indoor router shoved in one of them boxes that lived on the roof for years, never got one bit of moisture in it ever. I used IP68 cable glands and that butyl based electrical sealing tape around the cables.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: water resistant /proof ecu housing

Post by vlad01 »

Here is a good one. Not the same as I used as it seems jaycar don't sell it anymore? was 10 years ago mind you.

https://www.jaycar.com.au/large-abs-ip6 ... e/p/HB6404
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: water resistant /proof ecu housing

Post by jenko »

Dylans link is pretty spot on
but will keep looking in the hope that I can find the right dimension
Post Reply