Well worth a look, great IP rating too.
https://www.brenclosures.com.au/pc.htm
water resistant /proof ecu housing
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: water resistant /proof ecu housing
Just an IP68 rated electrical box. I had one for a wireless link that used a linksys indoor router shoved in one of them boxes that lived on the roof for years, never got one bit of moisture in it ever. I used IP68 cable glands and that butyl based electrical sealing tape around the cables.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: water resistant /proof ecu housing
Here is a good one. Not the same as I used as it seems jaycar don't sell it anymore? was 10 years ago mind you.
https://www.jaycar.com.au/large-abs-ip6 ... e/p/HB6404
https://www.jaycar.com.au/large-abs-ip6 ... e/p/HB6404
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: water resistant /proof ecu housing
Dylans link is pretty spot on
but will keep looking in the hope that I can find the right dimension
but will keep looking in the hope that I can find the right dimension