Efi 253 with cop

A place For General Chit Chat Etc
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: Efi 253 with cop

Post by jenko »

Pulled welch plugs out 8 mm between bores which gives them 5.7 mm wall thickness so my block which has standard pistons in it has a bore of 92.35 mm and od of cylinder 103.75 mm so I think the hemi pistons will work leaving wall thickness at 4.0 mm.
308 blocks must have different bore casting and the bores would have to be almost siamesed to mantain reliable wall thickness
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Efi 253 with cop

Post by vlad01 »

geez thats pretty thin even for stock. V6 for comparison have about 8mm wall thickness, no wonder they do well on boost.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Post Reply