Access to the GM portal in Australia (Holden)

A place For General Chit Chat Etc
kostia111
Posts: 47
Joined: Mon Oct 21, 2019 4:58 am

Re: Access to the GM portal in Australia (Holden)

Post by kostia111 »

thanks
but judging by the file names
10/01 you programmed the engine control unit
25/03 power steering unit
since you did not program automatic transmission
naturally no files
04colyZQ8
Posts: 380
Joined: Thu Jan 16, 2014 12:41 pm
cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion

Re: Access to the GM portal in Australia (Holden)

Post by 04colyZQ8 »

Holden202T wrote:this is all i found.
spscache.jpg
Can you possibly get an Australian BCM files
for 2015 Holden Trax KL3BA7659FB194383
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: Access to the GM portal in Australia (Holden)

Post by Tazzi »

I do not have a compatible TCM on the bench to get the required TCM files. SPS freaks out and wants one on bench before it will download the required files. :thumbdown:
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
04colyZQ8
Posts: 380
Joined: Thu Jan 16, 2014 12:41 pm
cars: 2004 Colorado 4.8L swap
86/90 Jimmy 6.5L diesel swap
80 Chevrolet Silverado TBI swap
88dodge W100 LPG conversion

Re: Access to the GM portal in Australia (Holden)

Post by 04colyZQ8 »

Tazzi wrote:I do not have a compatible TCM on the bench to get the required TCM files. SPS freaks out and wants one on bench before it will download the required files. :thumbdown:
If it is a t76 or t43 tcm I think I have a simulator for that. If that helps the op out.
Post Reply