Seems to have limited reprogramming options unfortunately, but can be used stock .
- delco_tool.jpg (122.88 KiB) Viewed 4732 times
New Delco Tool
-
antus
- Site Admin
- Posts: 9040
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
New Delco Tool
Great new multipurpose tool discovered at the local pub, of all places!
Seems to have limited reprogramming options unfortunately, but can be used stock .
Seems to have limited reprogramming options unfortunately, but can be used stock .
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
delcowizzid
- Posts: 5639
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: New Delco Tool
hahahaha does it have a proven increase in eating performance using this fork am i gonna get better 0-full times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
antus
- Site Admin
- Posts: 9040
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: New Delco Tool
Well, its a pretty good fork, but will only work within the original specs. I went searching for pre-existing mods, but all I could find was this ricer kit.
- Flashing-Fork-18302911171.jpg (23.87 KiB) Viewed 4726 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Holden202T
- Posts: 10394
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: New Delco Tool
you got too much spare time man 
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: New Delco Tool
Thats a quality fork! haha Nice find.