XC barina / Corsa C Bcm 93c66 eeprom bin needed

A place For General Chit Chat Etc
Post Reply
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by mattyjf01 »

Looking for
XC barina / Corsa C Bcm 93c66 eeprom bin file

RS
313203739
5WK4 8663

I reset it without doing the 10 second ignition cycle now it can't be reset or programmed
Thanks
Matt
16493171338643702958280763591235.jpg
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by The1 »

Here's 2 i have.
Attachments
93c66-barinaxx-YE BCM-pin6492.bin
(512 Bytes) Downloaded 83 times
93c66-barinaxx-VF BCM-pin1624.bin
(512 Bytes) Downloaded 89 times
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by mattyjf01 »

The1 wrote:Here's 2 i have.
Not what im looking for but thanks anyway
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by Tazzi »

mattyjf01 wrote:Not what im looking for but thanks anyway
What protocol was that using? ALDL, or CANbus?

What error are you getting when it tries to security link? As in whats the error code on the comms line?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by mattyjf01 »

Tazzi wrote:
mattyjf01 wrote:Not what im looking for but thanks anyway
What protocol was that using? ALDL, or CANbus?

What error are you getting when it tries to security link? As in whats the error code on the comms line?
Kline using opcom
Wrong code using 0x27
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by mattyjf01 »

Haven't worked out how to monitor an opcom or tech 2 kline session yet
only carprog
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by mattyjf01 »

Tazzi wrote:
mattyjf01 wrote:Not what im looking for but thanks anyway
What protocol was that using? ALDL, or CANbus?

What error are you getting when it tries to security link? As in whats the error code on the comms line?
Thanks Tazzi i adjusted the baud rate in my ALDL logger from 8192 to 10400
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by The1 »

Barina XC or Corsa C is both Kline 10400 and CAN bus mix :lol:
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by Tazzi »

mattyjf01 wrote:
Tazzi wrote:
mattyjf01 wrote:Not what im looking for but thanks anyway
What protocol was that using? ALDL, or CANbus?

What error are you getting when it tries to security link? As in whats the error code on the comms line?
Thanks Tazzi i adjusted the baud rate in my ALDL logger from 8192 to 10400
Winning! :thumbup:
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
mattyjf01
Posts: 282
Joined: Wed Sep 04, 2019 8:41 pm

Re: XC barina / Corsa C Bcm 93c66 eeprom bin needed

Post by mattyjf01 »

So after resetting a bcm you need to turn the ignition off for 10 seconds so it writes to eeprom then on again before programming.
This is the second time ive made this mistake( you would think i would of learnt after the first time).
Eeprom has two copies of the code but only one is zeroed out.

After you said ALDL i remembered not been able to monitor ALDL when tech2 was connected with some cables
I have a usb to uart board wired for receiving only(might be an arduino nano with default program).

It sends eg 1234
0x27 0x80 0x31 0x32 0x33 0x34

returns wrong code entered
0x7F 0x27 0x35

Ill try Zeroing out the eeprom if that doesnt work
Ill send
0x27 0x80 0x00 0x00 0x00 0x00
Post Reply