FS: USB Communications Boards
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
FS: USB Communications Boards
USB Communications Boards
Ordering Information: Order the latest revisions from antus via PM. See the new for sale thread here: http://pcmhacking.net/forums/viewtopic.php?f=14&t=3613
Ordering Information: Order the latest revisions from antus via PM. See the new for sale thread here: http://pcmhacking.net/forums/viewtopic.php?f=14&t=3613
-
- Posts: 11
- Joined: Wed Mar 28, 2012 8:14 pm
- cars: Holden VL Calais Wagon 5L
RB30ET Datto Ute (in progress) - Location: Boyanup, WA
Re: FS: USB Communications Boards
Afternoon,
been looking into retuning for a while, specifically 808's, and later on buicks and ecotecs (VR/VS V6's). Been doing a fair bit o research the last few months and would be keen to get a USB comms board off you.
Would also be keen to get a hold of a NVRAM board conversion also.
whats the easiest way to make this happen?
Cheerio
also this site has been a wealth of info.
been looking into retuning for a while, specifically 808's, and later on buicks and ecotecs (VR/VS V6's). Been doing a fair bit o research the last few months and would be keen to get a USB comms board off you.
Would also be keen to get a hold of a NVRAM board conversion also.
whats the easiest way to make this happen?
Cheerio
also this site has been a wealth of info.
-
- Posts: 77
- Joined: Fri Jul 02, 2010 8:53 pm
- cars: Vt v6 Berlina daily driver
vs clubsport high comp solid cammed 355 brass buttoned t56 6 speed 4.11 diff - Location: Seymour, Vic
Re: FS: USB Communications Boards
just a quick question does this usb coms board convert an 808 into n 082/305 or do you still need the sxr board?
cheers
Rob
cheers
Rob
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: FS: USB Communications Boards
you can use it in an 808 to log/tune, but if you wanted to put an 808 in a VR say and wanted it to interface with the other parts of the car you'd need the sxr chip and then the data would work from the factory obd port .... effectively like a vr manual ecm.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 77
- Joined: Fri Jul 02, 2010 8:53 pm
- cars: Vt v6 Berlina daily driver
vs clubsport high comp solid cammed 355 brass buttoned t56 6 speed 4.11 diff - Location: Seymour, Vic
Re: FS: USB Communications Boards
Thnx holden202 thats exactly what i suspected. Cheers!
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: FS: USB Communications Boards
the posts that were here for VPGTS076 have been split and moved here https://pcmhacking.net/forums/viewtopi ... =28&t=2431
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: FS: USB Communications Boards
hey bud, dumb question prob but is this chip bi-directional on a 808 or only the serial chip?
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: FS: USB Communications Boards
On a 808 with this if you use a vr or vs manual memcal (or nvram/memcal with 12p) you get full bidirectional comms at 8192 baud.
Re: FS: USB Communications Boards
Hi VL400,
Can u use this board on the 808 to log at 8192 without changing the memcal?
ive got a kalmaker tune on it and i dont have access to the guy who tuned my car anymore.
im able to log data using the winaldl with the 808 def on 160 baud atm.
Edit: can i get some more details about the installation required?
Thanks
Rob
Can u use this board on the 808 to log at 8192 without changing the memcal?
ive got a kalmaker tune on it and i dont have access to the guy who tuned my car anymore.
im able to log data using the winaldl with the 808 def on 160 baud atm.
Edit: can i get some more details about the installation required?
Thanks
Rob