Winbond W27C512-45Z 28pin 45ns ROUND 2

Hardware and Software. If you have something to sell, post it here.
User avatar
antus
Site Admin
Posts: 8250
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by antus »

These are winbond brand flash. Not SST. They have different write voltages I think, but thats not a problem as they are widely supported by programmers. The big plus is The1 has a reputable supplier, so they are not forgeries and do work! Your probably buying SST from Moates and he has a good supply of real SSTs so they are fine, but post to AU isnt great and most of whats on ebay are fake and dont work (ive been stung, got a batch of 20 fake SSTs from ebay. They put one 1 good one in the end of the strip so my first test was ok, and the rest turned out to be duds by the time I used them).

delco: these W27C winbond are electronic erase. Its just different manufacturers naming scheme.
Attachments
W27C512-45Z.pdf
(192.53 KiB) Downloaded 368 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by The1 »

EagleMark wrote:How do these compare to the SST 27FS512 chips? Pretty sure they are compatible but... what is difference between C and F ?

Idea on cheap shipping to USA cost?
About $15AUD if it is less than 500grams going by australia post, this is for airmail.

I have the same supplier for these and also the SST 27SF010 and am yet to have a failure, have tested a couple with a erase/write script for a few hrs straight without issues and sold about 600 of the 1Mbit chips so far with no returns :)
User avatar
EagleMark
Posts: 45
Joined: Tue Dec 20, 2011 4:52 am
cars: 1994 Buick RoadMaster LT1
1972 IH 345 16197427 PCM Project
1990 Chevy 1227747 HighWay Lean Cruise
Location: North Idaho USA

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by EagleMark »

Thanks guys... or let me try it it your language... Cheers mates! :-) Did I do that right?

Put me done for 20.

Thanks!
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by The1 »

they are all sold atm, but pending enough interest i will get more in.
User avatar
EagleMark
Posts: 45
Joined: Tue Dec 20, 2011 4:52 am
cars: 1994 Buick RoadMaster LT1
1972 IH 345 16197427 PCM Project
1990 Chevy 1227747 HighWay Lean Cruise
Location: North Idaho USA

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by EagleMark »

I'll be waiting when you have enough for an order :-)
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by The1 »

ill check with the supplier and go for round 3
User avatar
EagleMark
Posts: 45
Joined: Tue Dec 20, 2011 4:52 am
cars: 1994 Buick RoadMaster LT1
1972 IH 345 16197427 PCM Project
1990 Chevy 1227747 HighWay Lean Cruise
Location: North Idaho USA

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by EagleMark »

D'oh!
I thought this one was still going... well if it happens again count me in! :-)
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by The1 »

i have checked and i can only get W27C512-70 at the moment i can't get any of the 45ns ones atm. I normally only buy 100+ but i can buy 50 works out to $2.60 each in USD.
v8-tuning
Posts: 182
Joined: Mon Mar 19, 2012 7:46 pm
cars: 304 commodore

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by v8-tuning »

Im keem on a large order,if you don't get enough ill buy 50
so you can do an order of 100 so we get them cheaper.
Don't have all that many left so def keen on another order soon.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Winbond W27C512-45Z 28pin 45ns ROUND 2

Post by The1 »

well eaglemark is after 20 so can order 50 if you want to buy 30, either way if you both message me we'l sort out payment then ill put an order in, i havn't had any other interest to start a bulk buy.
Post Reply