Delphi MAF 25168491 SOLD

Hardware and Software. If you have something to sell, post it here.
User avatar
Posts: 4157
Joined: Mon Jan 04, 2010 10:23 am

Delphi MAF 25168491 SOLD

Postby The1 » Thu Dec 05, 2013 9:13 pm

Genuine Silver badged Delphi MAF, This is a used unit, i have cleaned and tested. Good for around 11400hz

$90 + Post
IMG_0715.jpg
IMG_0715.jpg (211.93 KiB) Viewed 5153 times

IMG_0717.jpg
IMG_0717.jpg (210.06 KiB) Viewed 5153 times

1.jpg
1.jpg (58.68 KiB) Viewed 5165 times

User avatar
Posts: 2573
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Delphi MAF 25168491

Postby Jayme » Fri Dec 06, 2013 7:44 am

is this as seen on stock ls1? or is bigger?

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Delphi MAF 25168491

Postby VX L67 Getrag » Fri Dec 06, 2013 7:53 am

I believe this is as seen on LS2 & possibly L76/L98 but they are 1's that are hard to find & there's a lot of knock off's that don't have the higher Hz scale!

User avatar
Posts: 4157
Joined: Mon Jan 04, 2010 10:23 am

Re: Delphi MAF 25168491

Postby The1 » Fri Dec 06, 2013 7:53 am

there used on VZ V8's i think, but this was from the US Chev Tahoe use them. I got 2 in from the US to retest after the AU ones were found to be limiting to 11,500hz or around there, seems these do as well, was just a brand new one that went to 14,000hz perhaps a revision in the new ones and they can read higher but seems anything used i have tested or anyone else so far is limited to around 11,500hz, the plastic acdelco ones are heading around the same limitation as well.

User avatar
Posts: 2573
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Delphi MAF 25168491

Postby Jayme » Fri Dec 06, 2013 7:55 am

so I would need an adapter loom to use this on my ls1 as well?

User avatar
Posts: 4157
Joined: Mon Jan 04, 2010 10:23 am

Re: Delphi MAF 25168491

Postby The1 » Fri Dec 06, 2013 7:57 am

LS1 has 3pin MAF and 2 pin IAT?

User avatar
Posts: 2573
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Delphi MAF 25168491

Postby Jayme » Fri Dec 06, 2013 8:28 am

yep

User avatar
Posts: 4157
Joined: Mon Jan 04, 2010 10:23 am

Re: Delphi MAF 25168491

Postby The1 » Fri Dec 06, 2013 8:47 am

You will need the joiner to 5 pin, same as the ones i have for sale but has different MAF plug, ive just put up a post in enhanced thread about which plugs fit which maf's.

viewtopic.php?f=27&t=2518&p=38129#p38129

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Delphi MAF 25168491

Postby VX L67 Getrag » Fri Dec 06, 2013 9:39 am

Sorry don't want to confuse things but LS1 maf's actually only have the 3 pin plug with IAT seperate, from what I've worked on anyway!

User avatar
Posts: 2573
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Delphi MAF 25168491

Postby Jayme » Fri Dec 06, 2013 9:46 am

which is exactly what The1 meant... 3 pin Maf plus separate 2 pin IAT...

Next

Return to For Sale

Who is online

Users browsing this forum: No registered users and 2 guests