FS: ECM USB Comms

Hardware and Software. If you have something to sell, post it here.
4x4sandman
Posts: 13
Joined: Thu Mar 05, 2015 7:48 pm
cars: Too many... vs, wl, hj, hz, wb, gq...

Re: FS: ECM USB Comms

Post by 4x4sandman »

No I don't. :(
4x4sandman
Posts: 13
Joined: Thu Mar 05, 2015 7:48 pm
cars: Too many... vs, wl, hj, hz, wb, gq...

Re: FS: ECM USB Comms

Post by 4x4sandman »

Ok, so I can see two options, 1; take the nvram out and plug it into where the memcal goes in the vg's original computer, it looks like the same plug there, or 2; re-pin the harnes plug to suit the later model computer.. option one seems too easy so im hesitant already!
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: FS: ECM USB Comms

Post by Jayme »

for option 1, you need to reburn the nvram in an eprom burner with 12P (manual code) and get one of these comms boards from the start of this thread and solder onto the 808.
for option2, you can get both wiring diagrams and match up the pin swaps. I generally label every wire with where it came from and where its going, then pull all the pins out and put them back in the right order for the new pcm.
4x4sandman
Posts: 13
Joined: Thu Mar 05, 2015 7:48 pm
cars: Too many... vs, wl, hj, hz, wb, gq...

Re: FS: ECM USB Comms

Post by 4x4sandman »

Option 2 it is for now then. Thanks very much for helping a newbie to everyone who posted.

Ps, Jayme, re usb comms, pm sent.
kon308
Posts: 2
Joined: Sat Mar 01, 2014 4:41 pm
cars: HEAPS
Location: THE GONG

Re: FS: ECM USB Comms

Post by kon308 »

Who is the best to contact to purchase from?
blake
Posts: 1
Joined: Mon Jan 19, 2015 5:09 pm

Re: FS: ECM USB Comms

Post by blake »

Can this USB board work with a 1227730 ECM?
big cams
Posts: 54
Joined: Fri Mar 06, 2015 4:54 pm
cars: lots of holdens

Re: FS: ECM USB Comms

Post by big cams »

how do I go about getting one of these ECM USB Comms
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: FS: ECM USB Comms

Post by Dylan »

Opening post says to contact Jayme.
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: FS: ECM USB Comms

Post by Jayme »

Apologies missed the pm.
Chuff
Posts: 267
Joined: Thu Dec 20, 2012 5:28 pm
Location: Melbourne

Re: FS: ECM USB Comms

Post by Chuff »

Hey all,

Could someone in the know please tell me if there is any performance increase/decrease between connecting to a '165 ECU via the ALDL port vs connecting to an '808 + USB Comms board, or will performance be exactly the same for both read & write operations?

Thanks.

Chuff
˙ʎɐqǝ ɟɟo pɹɐoqʎǝʞ ǝsǝuıɥɔ ɐ ƃuıʎnq ɹoɟ ʇɥƃıɹ ǝɯ sǝʌɹǝs
Post Reply