FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)

Hardware and Software. If you have something to sell, post it here.
Site Admin
User avatar
Posts: 5821
Joined: Sat Feb 28, 2009 8:34 pm

FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67)

Postby antus » Sat Jun 28, 2014 6:20 pm

PCM NVRAM Conversion

Contact Biggvl to order PCM NVRAM'S.

There are 18 in stock as of November 2019

pcm nvram.png
pcm nvram.png (189.18 KiB) Viewed 14922 times


Suitable for PCMs with these service numbers:

16208257
16199728
16210672
16234531
16210480
16233396

For a full compatibility matrix see the hardware and software guide here http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396

These PCMs were used in these applications:

VS Ecotec - Normally Aspirated and Supercharged.
VS V8 Auto Series 3 (MAF engine).
VT V6 (Normally Aspirated and Supercharged*), V8 (except series 2, LS1)
VX Supercharged

Note Supercharged tunes suit boosted applications, including turbo.

Usage
These NVRAM kits are used to replace the factory memcal and enable real time tuning with The1s extended software or realtime factory software. The most suitable base tune will be installed on the NVRAM and it will be tested prior to shipping.

Beware the clones
PCMHACKING.net products use only genuine components. The NVRAM is genuine Dallas/Maxim and is the industrial version which can withstand high cabin temperatures. They also include a high quality battery which provides long life (10 years after first use). For more information on clones, see http://pcmhacking.net/forums/viewtopic.php?f=7&t=2685

More information
If you need more information about the use of this hardware, click the FAQ button at the top/right of the forums and have a read of the documents available for download there.

Purchasing
PCM NVRAMs are $200AUD each, and $20 for postage and handling. Please ask for a shipping cost for international orders.

To go with your NVRAM you will require an ALDL interface - http://pcmhacking.net/forums/viewtopic.php?f=14&t=3616
PCMHACKING.net ALDL interfaces are the only interfaces that are guaranteed to work with our NVRAM.
If you wish to purchase one of these PCM NVRAMs contact biggvl via PM.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 8
Joined: Wed Oct 02, 2019 12:57 pm

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby Spookydriftr » Wed Nov 13, 2019 12:45 pm

Just to get my head around this as I'm new to this side of playing with cars, I remove my factory chip and replace with one of these nvram, will I need a tune straight away or will it be the same tune as standard. I just spent alot of money repairing my laptop thinking I can use tunerpro without any modification but turns out I was wrong and that is for the na motor. I can't get my car tuned untill next year now and I want to be able to change fans on temp and gear change settings as I have a bigger throttle body to go on. Any advice is very much appreciated cheers Lucas

User avatar
Posts: 2076
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby Biggvl » Wed Nov 13, 2019 1:06 pm

Simple answers to all your questions is, yes.

The file loaded is standard (the1's enhanced code), you would tune this to suit your combination.
According to chemistry, alcohol is a solution...

Posts: 3
Joined: Thu Jun 06, 2019 7:42 am

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby GmanVS » Wed Nov 13, 2019 3:20 pm

Hi Lucas, I have just put one of these in my VS acclaim. I am running an L67 through a Getrag 5 speed. I couldn't be happier. This board is plug and play. Install Tunerpro RT 5, the OSE plug in and get an ALDL cable and you're away. I made a couple of missteps while learning but they are avoidable. I have a programmer now which is great because it can read what's on the chip and gives you an ASCII version through its own software. If you want total control this is the setup for you.

Posts: 8
Joined: Wed Oct 02, 2019 12:57 pm

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby Spookydriftr » Wed Nov 13, 2019 5:13 pm

Thanks biggvl, so I do need to tune it straight away or would the advanced one loaded on the nvram work as normal or does the enhanced feature make that not possible? GmanVS thanks for your advice what is the OSE plugin that I'll need or does that come with tunerpro? I'm still getting my head around adx files and bins haha

Site Admin
User avatar
Posts: 5821
Joined: Sat Feb 28, 2009 8:34 pm

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby antus » Wed Nov 13, 2019 5:19 pm

Have a look at the hardware and software guide in the faq area (see link near the top right of the screen) that should explain the hardware options and provide links to the software. Ose plugin is a tunerpro plugin for this setup.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 8
Joined: Wed Oct 02, 2019 12:57 pm

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby Spookydriftr » Wed Nov 13, 2019 5:35 pm

Thanks antus just trying to figure this all out, cheers

Posts: 396
Joined: Thu Nov 03, 2011 7:57 pm
Location: perth wa

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby vs ss » Wed Nov 13, 2019 9:15 pm

Yeah mate, just plug it in and the car will drive the same as before, therefore no need to tune straight away. :thumbup:

Posts: 8
Joined: Wed Oct 02, 2019 12:57 pm

Re: FS: PCM NVRAM Conversion (VS Ecotec, VT V6/V8, VX/VY L67

Postby Spookydriftr » Thu Nov 14, 2019 8:07 am

Thanks vs ss for your time mate, thanks to everyone for their advice I really appreciate it

Return to For Sale

Who is online

Users browsing this forum: No registered users and 1 guest