FS: VN-VY Memcal & Adaptors

Hardware and Software. If you have something to sell, post it here.
User avatar
antus
Site Admin
Posts: 8231
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: FS: The1's Memcal & Adaptors

Post by antus »

Doh! Good point.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: FS: The1's Memcal & Adaptors

Post by delcowizzid »

i just saw the pdf named 27sf512 and presumed 28 pin LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: FS: The1's Memcal & Adaptors

Post by The1 »

the only 512 ones available atm are 120ns ones @ $7 each for 200 quantity, that's also in the new MTP version.
User avatar
vlad01
Posts: 7772
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: FS: The1's Memcal & Adaptors

Post by vlad01 »

ok so whats the options here?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: FS: The1's Memcal & Adaptors

Post by The1 »

You can only use 28pin chips on vn-vr memcals

I can order SST ones in but its 200 for an order, if enough interest I can start a bulk buy thread
immortality
Posts: 3412
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: FS: The1's Memcal & Adaptors

Post by immortality »

I'm keen on a couple of 512 chips if you intend to get some.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: FS: The1's Memcal & Adaptors

Post by The1 »

a couple as in 200? :D I havn't had any further interest.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: FS: The1's Memcal & Adaptors

Post by The1 »

ive test 2 of these MTP chips and one from 1st and one from 2nd batch i ordered in both got 1400 - 1500 cycles, well above the datasheet spec and well above the older chips which usually only made the 1000.
User avatar
vlad01
Posts: 7772
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: FS: The1's Memcal & Adaptors

Post by vlad01 »

Thats a lot of cycles.

So are these like a square package with rolled over pins?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: FS: The1's Memcal & Adaptors

Post by The1 »

same chip on the memcal in the photo on the 1st page
Post Reply