memcals sockets and knock filter boards
memcals sockets and knock filter boards
I have a few memcals i have removed the eproms from and a heap of knock filter boards if anyone needs any
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: memcals sockets and knock filter boards
any V8 memcals and v8 knock filter boards im looking for one for my realtime ecu so i have knock sensor and real v8 netres for tuning
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: memcals sockets and knock filter boards
plenty of knock filter boards i can't remember what they were from appears to be only two different types.
I couldn't find any spare v8 resistor packs all v6 i usually just put a resistor in to change to v8.
I couldn't find any spare v8 resistor packs all v6 i usually just put a resistor in to change to v8.
-
- Posts: 45
- Joined: Sun Jan 17, 2010 6:14 pm
- cars: Holdens 66, 76, 77, 90, 05
- Location: Melbourne
Re: memcals sockets and knock filter boards
I have a non KS memcal. If it is possible to add the KS board to my memcal (rather than trying to souce another) then I would appreciate one.
Let me know how we can arrange it.
Thanks, Hatch
Let me know how we can arrange it.
Thanks, Hatch
Re: memcals sockets and knock filter boards
Yes just solders on to a standard memcal
-
- Posts: 45
- Joined: Sun Jan 17, 2010 6:14 pm
- cars: Holdens 66, 76, 77, 90, 05
- Location: Melbourne
Re: memcals sockets and knock filter boards
Can you spare two Knock filter boards.
Cheers, Arch
PM me for details
Cheers, Arch
PM me for details
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: memcals sockets and knock filter boards
its finding a v8 one thats hard a v6 one will sort of work but isnt tuned to the resonance of the v8 engine so may not go off early enough or may go off to much rendering it nearly useless but one can only try theres many different v6 ones you can try too ive got 7 different numbers at least in the knock filters for v6
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: memcals sockets and knock filter boards
I have about 20 of them how do i tell a v8 one from a v6 one
Re: memcals sockets and knock filter boards
have you still got some memcals
im after a few with and without knockboards.
im after a few with and without knockboards.
Re: memcals sockets and knock filter boards
I have v6 ones vn and vr with knock filter boards no v8 ones but easy enough to change and a heap of vt vs ones.