VS SIII V8 manual PCM & engine harness wanted

Hardware and Software. If you have something to sell, post it here.
Post Reply
DSG
Posts: 1
Joined: Mon Oct 20, 2014 1:42 pm
cars: VS statesman, VH roller

VS SIII V8 manual PCM & engine harness wanted

Post by DSG »

Hi there,

I am putting a VT SI roller engine & 6 speed into my 98 VS statesman and am looking for a SIII VS V8 manual loom and PCM to be able to adapt the donk to the vehicle as the VT SI looms will not plug into a VS without big mods. Nor will a VT PCM send the fuel usage data to the VS level3 instrument cluster.

Any help as to where I could track these parts down would be greatly appreciated,

cheers
Dazza92VP
Posts: 607
Joined: Sun Jun 06, 2010 9:59 am
cars: 92 VP V8 Wagon
Location: Perth

Re: VS SIII V8 manual PCM & engine harness wanted

Post by Dazza92VP »

The vt and vs series 3 PCMs are the same and they are the same from auto to manual as well all you have to do is put a vs series 3 bin on the vt memcal and it will all work fine
Post Reply