VR V6 Manual

Hardware and Software. If you have something to sell, post it here.
Post Reply
PaulR
Posts: 51
Joined: Sun Nov 30, 2014 3:39 pm
cars: VS 355

VR V6 Manual

Post by PaulR »

Have for sale complete car, engine runs well. reco 5 speed gearbox. no rego. May seperate parts.
http://www.ebay.com.au/itm/Holden-VR-Co ... SwB09YMXQB
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: VR V6 Manual

Post by Holden202T »

vlad next project ?? :)
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: VR V6 Manual

Post by vlad01 »

Holden202T wrote:vlad next project ?? :)
too rough for me lol
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Macca97
Posts: 155
Joined: Wed Jan 07, 2015 1:21 pm
cars: hj ute, hz wagon, copious amounts of random half started side projects
Location: Mid North Coast

Re: VR V6 Manual

Post by Macca97 »

do you have to run a 424? or can you go 12p and 808 on one of these? could possibly be interested
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VR V6 Manual

Post by Dylan »

Should already have an 082 in it being factory manual. Or an 808 worst case.
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: VR V6 Manual

Post by vlad01 »

I fitted and 808 in my VR with T5 and also fitted the SXR board so I could use the ALDL cable and have vats too, the starting delay otherwise shits me.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
PaulR
Posts: 51
Joined: Sun Nov 30, 2014 3:39 pm
cars: VS 355

Re: VR V6 Manual

Post by PaulR »

the car is original auto, still has the Auto 424 ecu and harness. speedo etc has been wired up and Auto fault codes been turned off with 11p
Post Reply