Have for sale complete car, engine runs well. reco 5 speed gearbox. no rego. May seperate parts.
http://www.ebay.com.au/itm/Holden-VR-Co ... SwB09YMXQB
VR V6 Manual
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VR V6 Manual
vlad next project ??
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VR V6 Manual
too rough for me lolHolden202T wrote:vlad next project ??
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 155
- Joined: Wed Jan 07, 2015 1:21 pm
- cars: hj ute, hz wagon, copious amounts of random half started side projects
- Location: Mid North Coast
Re: VR V6 Manual
do you have to run a 424? or can you go 12p and 808 on one of these? could possibly be interested
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
Re: VR V6 Manual
Should already have an 082 in it being factory manual. Or an 808 worst case.
- vlad01
- Posts: 7803
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VR V6 Manual
I fitted and 808 in my VR with T5 and also fitted the SXR board so I could use the ALDL cable and have vats too, the starting delay otherwise shits me.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: VR V6 Manual
the car is original auto, still has the Auto 424 ecu and harness. speedo etc has been wired up and Auto fault codes been turned off with 11p