220kw gts stroker cam out of VT S1

Hardware and Software. If you have something to sell, post it here.
Post Reply
The J'rod
Posts: 105
Joined: Fri Jul 22, 2016 5:54 pm
cars: Vs V8 series 3 commodore ute
Location: Sunshine Coast

220kw gts stroker cam out of VT S1

Post by The J'rod »

Hi all,
I have a original cam out of a VT GTS S1 220kw stroker motor in good condition, was going to put it in my S3 ute but thinking I might go in a different direction, great cam for stock 304's looking for just a bit more poke or someone wanting to do a gts 220kw spec motor.

cam specs are:
Hydraulic Roller
112 Lobe Seperation
209/208 duration @0.050
Peak lift .464


Happy to discuss any further questions or inquiries just pm me The J'Rod (will post)
User avatar
Cleaver
Posts: 17
Joined: Sat Aug 05, 2023 2:18 pm
cars: WB ute (HSV 195i / 4L60E conversion in progress)
Location: Roxby Downs, SA.

Re: 220kw gts stroker cam out of VT S1

Post by Cleaver »

Hey mate,
Can you send through some pictures of the lobes and bearing journals on the 220i cam?
Attempted to send a PM but won't allow..? Maybe because I'm a new user?
Thankyou..
Cheers
Cleaver
Horsepower sells cars, Torque wins races 8-)
Deuce
Posts: 24
Joined: Mon Feb 01, 2021 1:03 pm
cars: TUF355

Re: 220kw gts stroker cam out of VT S1

Post by Deuce »

Cleaver wrote:Hey mate,
Can you send through some pictures of the lobes and bearing journals on the 220i cam?
Attempted to send a PM but won't allow..? Maybe because I'm a new user?
Thankyou..
Cheers
Cleaver
After 6 years it's probably sold already mate.
Welcome to the forum
User avatar
Cleaver
Posts: 17
Joined: Sat Aug 05, 2023 2:18 pm
cars: WB ute (HSV 195i / 4L60E conversion in progress)
Location: Roxby Downs, SA.

Re: 220kw gts stroker cam out of VT S1

Post by Cleaver »

Thanks.. My bad.. Did some digging and found out that the 195i cam and the 220i oem cam shared the same part number and specifications: oem # 92063624
Horsepower sells cars, Torque wins races 8-)
Post Reply