265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
Posts: 454
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Tue Jun 27, 2017 2:40 pm

Charlescrown wrote:I don't know how your speedo cable fits but if it's a screw on cable to the fitting in the transmission you can get one that fits inline without fiddling with the speedo cable.


I've been trying to find one for a Borg Warner 35 but haven't been able to locate one as yet. The tuner put me onto Gaugewworks who can fit one to the speedo cable so this is at least a work around.

Posts: 945
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: 265 Hemi to efi

Postby Charlescrown » Wed Jun 28, 2017 9:08 am

I got mine (for a Jap gearbox) from Airco Auto Instruments in Marrickville. They have a website. Give them a call and see if they can supply one. I think it might be a better option than modifying the speedo cable. The only consideration would be the length of the unit and clearance with the floor.

Posts: 454
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Jun 28, 2017 9:08 pm

Charlescrown wrote:I got mine (for a Jap gearbox) from Airco Auto Instruments in Marrickville. They have a website. Give them a call and see if they can supply one. I think it might be a better option than modifying the speedo cable. The only consideration would be the length of the unit and clearance with the floor.

Thanks, I agree. I will contact them and see what they have.

Posts: 454
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Thu Jun 29, 2017 10:28 am

heff0018 wrote:
Charlescrown wrote:I got mine (for a Jap gearbox) from Airco Auto Instruments in Marrickville. They have a website. Give them a call and see if they can supply one. I think it might be a better option than modifying the speedo cable. The only consideration would be the length of the unit and clearance with the floor.

Thanks, I agree. I will contact them and see what they have.


Maybe they have changed, I called and they didn't want to know about it.

Posts: 454
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Sep 04, 2017 8:15 pm

This is a bit off topic but thought I would share anyway. Pre fitting and aligning panels on the VH charger

Image

There is going to be a fair bit of welding, filling and griding to get the door gaps any where near acceptable.

Image



This front end took a long time to get together but looking ok except for the front panel to hood alignment, the guards are NOS and I had to refit the original headlight panel which is all spot welded. Both panels are temporarily held together by self tappers so that I can pull and push the two panels into alignment.

Image



Will get back to the Ute, turbo and efi soon.

Cheers

User avatar
Posts: 8983
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 265 Hemi to efi

Postby Holden202T » Wed Sep 06, 2017 9:33 am

painful job, but makes the car look a lot better if its all right!

Posts: 458
Joined: Sun Jun 06, 2010 9:59 am
Location: Perth

Re: 265 Hemi to efi

Postby Dazza92VP » Wed Sep 06, 2017 6:02 pm

Love the old chargers wish mine was in as good nick as your one. Like Holden202 said worth pain satisfaction at the end is so much better

Posts: 454
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Sep 06, 2017 8:35 pm

Holden202T wrote:painful job, but makes the car look a lot better if its all right!

The panel fit from the factory especially on the VH's was pretty ordinary to start with so it will make a big difference to have even gaps all round.

Posts: 454
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Sep 06, 2017 8:41 pm

Dazza92VP wrote:Love the old chargers wish mine was in as good nick as your one. Like Holden202 said worth pain satisfaction at the end is so much better


Yeah there was a lot of work done by the previous owner and a lot by me to get it to this stage. Still lots to go but I'm sure glad I prefit all these panels before going any further. I am in the process of assembling the doors to make sure everything fits ok but lots of small bits missing that I need to find.

Posts: 454
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Thu Oct 12, 2017 8:10 pm

Hi all, I am looking to hook up the neutral park signal from the trans to the ecu. I am not that great at auto electrical so I thought I should seek some advice so I don't cook the ecu. If the switch signal wire is putting out voltage when in park or neutral is this ok to connect to B10? The diagram shows B10 as an earth circuit. Cheers.

PreviousNext

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 2 guests