265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
Posts: 9448
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 265 Hemi to efi

Postby Holden202T » Sat Oct 14, 2017 12:32 pm

yeah needs to be the earth side .... can always run it through a relay if your seeing voltage.

Posts: 568
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Sat Oct 14, 2017 6:38 pm

Cheers, thanks for that

Posts: 568
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Feb 12, 2018 6:32 pm

Here's a pic of the turbo install coming together. Still need to plumb up the intercooler, oil return, and lithium battery among other things. Oh and new 3" exhaust required.
IMG_4166.JPG
IMG_4166.JPG (128.53 KiB) Viewed 787 times

User avatar
Posts: 5894
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: 265 Hemi to efi

Postby vlad01 » Mon Feb 12, 2018 7:38 pm

You might want a bigger filter than that. Its going to chock the shit out of it.

Apart from that, everything else is looking great.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Posts: 568
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Feb 12, 2018 7:59 pm

vlad01 wrote:You might want a bigger filter than that. Its going to chock the shit out of it.

Apart from that, everything else is looking great.

Yeah thanks, need to cut a big hole in that front panel and get a decent filter and cold air setup going.

User avatar
Posts: 5894
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: 265 Hemi to efi

Postby vlad01 » Mon Feb 12, 2018 8:02 pm

oh and you might as well go to a thermal fan and have the 808 control it at some point.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Posts: 568
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Tue Feb 13, 2018 6:17 am

vlad01 wrote:oh and you might as well go to a thermal fan and have the 808 control it at some point.


I have EL falcon twin thermos at home that are on the install list.

Posts: 1090
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: 265 Hemi to efi

Postby Charlescrown » Tue Feb 13, 2018 7:18 am

Looking good. Tell me about the Lithium battery.

Posts: 568
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Tue Feb 13, 2018 1:09 pm

Charlescrown wrote:Looking good. Tell me about the Lithium battery.


It is small enough to fit where the old washer bottle was located (which is just left of the MSD box in the pic), they are quite light and you can mount them in any direction. Not cheap though.

Posts: 568
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Thu Feb 15, 2018 12:18 pm

The lithium battery is installed and weighs in at a mighty 1.6kg

Battery.JPG
Battery.JPG (118.51 KiB) Viewed 723 times

PreviousNext

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 2 guests