265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
Posts: 141
Joined: Wed Jan 07, 2015 1:21 pm
Location: Mid North Coast

Re: 265 Hemi to efi

Postby Macca97 » Tue Jan 22, 2019 7:00 pm

holden engine bays :D lots of room for activities
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell

Posts: 664
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Sun Feb 17, 2019 5:05 pm

This big ass 3 core radiator from a Dodge big block has solved my overheating issue. Took it for a run up the hill today and at the same spot where it was hitting 100 degrees it only just hit 90 degress. On the flat it sat on around 82 degrees which is not even running the fans. At the lights it would creep up over 86 and the fans turn on and it drops back down again. The shroud has not even been sealed all that well yet, I just put it in to see how it would go and all good so far.


rad27.jpg
rad27.jpg (205.7 KiB) Viewed 57 times


rad28.jpg
rad28.jpg (151.3 KiB) Viewed 57 times


rad29.jpg
rad29.jpg (339.7 KiB) Viewed 57 times


rad31.jpg
rad31.jpg (148.63 KiB) Viewed 57 times


rad32.jpg
rad32.jpg (172.95 KiB) Viewed 57 times


rad33.jpg
rad33.jpg (275.95 KiB) Viewed 57 times

User avatar
Posts: 6168
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: 265 Hemi to efi

Postby vlad01 » Sun Feb 17, 2019 5:09 pm

nice job :thumbup:
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Posts: 664
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Sun Feb 17, 2019 6:19 pm

Cheers, the trailer came in hand. Who needs a bending brake, ha

User avatar
Posts: 9569
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 265 Hemi to efi

Postby Holden202T » Mon Feb 18, 2019 12:46 pm

nice one!

I regularly use my saw horses as a bender ;)

Previous

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 4 guests