265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
Posts: 698
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Jul 10, 2019 11:26 am

There is still a blue light showing when ignition is turned on.

Is Jayme still the go to person for hardware. Thanks

User avatar
Posts: 4838
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: 265 Hemi to efi

Postby delcowizzid » Wed Jul 10, 2019 12:51 pm

Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 698
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Jul 10, 2019 1:20 pm

delcowizzid wrote:Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off

Thanks Delcowizzid I will check tonight.

Posts: 698
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Jul 10, 2019 7:46 pm

Yep, blue light stays on for around 2 seconds after the ignition turned off

Posts: 698
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Fri Jul 12, 2019 8:09 am

delcowizzid wrote:Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off

Is that a good sign?

I was looking back through my old posts and hopefully it has just corrupted the NVRAM like it did previously. Now I just got to find my burner.

Cheers

User avatar
Posts: 4838
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: 265 Hemi to efi

Postby delcowizzid » Fri Jul 12, 2019 8:22 am

It means that there's code running on the ecu it's not fully corrupted but it doesn't mean to say that some part of the tune is not right
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 698
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Fri Jul 12, 2019 9:26 am

Thanks for the reply, cheers

Previous

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 5 guests