There was a good write up on the Kalmaker website on this possibly still on there.
Al done this on his own car once back in the day.
RB30 - Delco 808 conversion
Re: RB30 - Delco 808 conversion
Thought I'd go to the kalmaker site for a look haven't been on there for a while.
The websites not working. Wonder if it's something permanent?
The websites not working. Wonder if it's something permanent?
Re: RB30 - Delco 808 conversion
I did a conversion on a TB42 (very similar). we got a frankendizzy (falcon 6cyl upper with chopper wheel and hall effect, and TB42 lower half) used a v8 ign module and put it on 11P. we also had to swap out the injectors for high impedance ones. if I did it again id use a crank trigger and 6cyl jackeroo coil packs (simple crank trigger type) or buy VL400's module and interface that.
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: RB30 - Delco 808 conversion
Oh cool thanks guys, gives me something to give the guy to go off!
LMAO at kalmaker, I did search on there forum a month or so ago & was working then!
LMAO at kalmaker, I did search on there forum a month or so ago & was working then!