RB30 - Delco 808 conversion

Converting To Delco ECU From Carby Or Other Injection Systems
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: RB30 - Delco 808 conversion

Post by Dylan »

There was a good write up on the Kalmaker website on this possibly still on there.
Al done this on his own car once back in the day.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: RB30 - Delco 808 conversion

Post by Dylan »

Thought I'd go to the kalmaker site for a look haven't been on there for a while.
The websites not working. Wonder if it's something permanent?
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: RB30 - Delco 808 conversion

Post by Jayme »

I did a conversion on a TB42 (very similar). we got a frankendizzy (falcon 6cyl upper with chopper wheel and hall effect, and TB42 lower half) used a v8 ign module and put it on 11P. we also had to swap out the injectors for high impedance ones. if I did it again id use a crank trigger and 6cyl jackeroo coil packs (simple crank trigger type) or buy VL400's module and interface that.
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: RB30 - Delco 808 conversion

Post by VX L67 Getrag »

Oh cool thanks guys, gives me something to give the guy to go off!

LMAO at kalmaker, I did search on there forum a month or so ago & was working then!
Post Reply