How to convert a 202 to Delco

Converting To Delco ECU From Carby Or Other Injection Systems
Macca97
Posts: 155
Joined: Wed Jan 07, 2015 1:21 pm
cars: hj ute, hz wagon, copious amounts of random half started side projects
Location: Mid North Coast

Re: How to convert a 202 to Delco

Post by Macca97 »

started my 808 swap. dizzys all locked, stuck an ecotec throttle body on the manifold with the flange off a vn elbow as a spacer
n13 loom is about to get stripped and routed, and 2 injector plugs added

id post a few photos but since photobucket wont work, and i cant work out how to go straight from my phone or computer
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: How to convert a 202 to Delco

Post by Holden202T »

sounds like your getting there!

For pictures, when you post a reply (not quick reply) there is an option down the bottom of the window to upload an attachment, select that then choose the file you want and hit add the file...

once all the picture are uploaded your pretty much done, then there will be an option beside each picture that says place inline, if you put the cursor where you want it, then hit place inline it will put it in that spot.
Macca97
Posts: 155
Joined: Wed Jan 07, 2015 1:21 pm
cars: hj ute, hz wagon, copious amounts of random half started side projects
Location: Mid North Coast

Re: How to convert a 202 to Delco

Post by Macca97 »

scrapped the n13 loom, had way to many repairs in it, now have a v6 loom spread across the bench


trial photo
efi 202 1.jpg
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
syntaxterror
Posts: 29
Joined: Mon Oct 31, 2011 12:34 pm

Re: How to convert a 202 to Delco

Post by syntaxterror »

Holden202 Are you running a 36-1 or the 6+1 wheel to run the 0411 setup? I started with your tune to run my 3500 v6 on $12p with a 6+1 wheel when I had it. Would like to start building another one this time on a 0411.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: How to convert a 202 to Delco

Post by Holden202T »

i have a 202 running a 36 - 1 wheel and its using VL400's igntion module to do that, then i have run a delco on the stand with a 6 + 1 wheel and the jackaroo DFI module and v6 coils, and yes this is the same configuration i was trying to use with the 0411, but i haven't been able to get it going successfully yet enough to say its a good workable thing.

i am in the process of making a modified dizzy to use as a cam sensor, that might help things but im not sure, i have sort of lost interest and time at the moment, but i would like to see it work if that is at all possible.
syntaxterror
Posts: 29
Joined: Mon Oct 31, 2011 12:34 pm

Re: How to convert a 202 to Delco

Post by syntaxterror »

Hopefully vl400 does another run of the ignition module's as it would be nice to have 6 coils on the v6.
syntaxterror
Posts: 29
Joined: Mon Oct 31, 2011 12:34 pm

Re: How to convert a 202 to Delco

Post by syntaxterror »

Hi any progress on running the 202 on the 0411?
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: How to convert a 202 to Delco

Post by antus »

I think you should be able to do it without the cam sensor and with a distributor using just the low resolution trigger, but you'd need to come up with the base tune from one of the American v6 tunes to get started, as I dont think anyone has created any other base tunes yet. When in low resolution mode you also loose sequential injection. Most people loose interest when they hear they need to keep the distributor, and move to the 6+1 on the Delco 808 as its a common conversion and you can use Holden202Ts base tune as a good starting point.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: How to convert a 202 to Delco

Post by Holden202T »

i will re-visit this project one day and see if i can get a better result ... but it could be a long wait!
heff0018
Posts: 888
Joined: Tue Apr 21, 2015 1:42 pm
cars: CL valiant charger, VH valiant charger

Re: How to convert a 202 to Delco

Post by heff0018 »

If I can find some spare time I would like to experiment with this. It might be while off though. Too many projects.
Post Reply