How to convert a 202 to Delco
Re: How to convert a 202 to Delco
cheers dylan well that sounds pretty straight forward. i'd say the camira module would be the easiest to setup so i'll see if i can track one down & plug to suit.
Appreciate the quick response.
Appreciate the quick response.
-
- Posts: 8
- Joined: Wed Dec 20, 2017 4:28 pm
- cars: VK Calais 202
Re: How to convert a 202 to Delco
Hello everyone,
Merry Christmas
I am looking a converting my 1985 VK Calais efi 202 to delco
Just to clarify I can use a JE Camira, LD Astra or N13 pulsar wiring loom as they are the same engine, Is this correct ?
Thankyou
vkcalais202
Merry Christmas
I am looking a converting my 1985 VK Calais efi 202 to delco
Just to clarify I can use a JE Camira, LD Astra or N13 pulsar wiring loom as they are the same engine, Is this correct ?
Thankyou
vkcalais202
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: How to convert a 202 to Delco
i dunno about the astra, but the other two yes.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 8
- Joined: Wed Dec 20, 2017 4:28 pm
- cars: VK Calais 202
Re: How to convert a 202 to Delco
Thanks Holden202T
I thought the Holden LD Astra was the same as a Nissan N13 pulsar (rebadged). Same as a Toyota Lexcen and Holden Commodore
The Nissan N13 pulsar is easier to find than the Holden JE camira in my area
They all have the Holden Family II 4cyl engine
Thanks
vkcalais202
I thought the Holden LD Astra was the same as a Nissan N13 pulsar (rebadged). Same as a Toyota Lexcen and Holden Commodore
The Nissan N13 pulsar is easier to find than the Holden JE camira in my area
They all have the Holden Family II 4cyl engine
Thanks
vkcalais202
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: How to convert a 202 to Delco
either way if you cant find them you can easily mod a V6 commodore loom.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: How to convert a 202 to Delco
I think the Pulsar has a longer loom with the ECU under the passengers seat. I personally would use a VN loom with 6 injector plugs and knock sensor wiring. It will need a bit of chopping and relay wiring though.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: How to convert a 202 to Delco
Yeah the LD astra is correct. In my area there are usually more N13 pulsars but any of the above will do. The 4 Cylinder EFI looms are seperate from the main loom so that is nice but you need to make sure you end up with the right connectors for the ignition module and right number of injectors.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 8
- Joined: Wed Dec 20, 2017 4:28 pm
- cars: VK Calais 202
Re: How to convert a 202 to Delco
Hi,
I picked up a JE Camira efi wiring loom, JE Camira ECU, some sensors and VN V6 throttle body today from Upullit Adelaide for $143
All I need to do now is the conversion and get the ECU remapped and I am good to go
Thanks
Michael
I picked up a JE Camira efi wiring loom, JE Camira ECU, some sensors and VN V6 throttle body today from Upullit Adelaide for $143
All I need to do now is the conversion and get the ECU remapped and I am good to go
Thanks
Michael
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: How to convert a 202 to Delco
sweet that's a good start
theres a bin file in the custom tunes section for a stockish 202 with 808 ecu, it should get you started down the right path.
theres a bin file in the custom tunes section for a stockish 202 with 808 ecu, it should get you started down the right path.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 8
- Joined: Wed Dec 20, 2017 4:28 pm
- cars: VK Calais 202
Re: How to convert a 202 to Delco
Hi,
A couple quick questions about the 202 delco conversion
1. When I am modifying the 202 distributor can I use the original factory pulse generator inside ?
2. The two black wires coming from the pulse generator, can they plug straight into the new ignition module mounted underneath the old one ?
I am sure there will be more questions to come as I go further into this project
Thanks
vkcalais202
A couple quick questions about the 202 delco conversion
1. When I am modifying the 202 distributor can I use the original factory pulse generator inside ?
2. The two black wires coming from the pulse generator, can they plug straight into the new ignition module mounted underneath the old one ?
I am sure there will be more questions to come as I go further into this project
Thanks
vkcalais202