265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Jul 10, 2019 11:26 am

There is still a blue light showing when ignition is turned on.

Is Jayme still the go to person for hardware. Thanks

User avatar
Posts: 4978
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: 265 Hemi to efi

Postby delcowizzid » Wed Jul 10, 2019 12:51 pm

Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Jul 10, 2019 1:20 pm

delcowizzid wrote:Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off

Thanks Delcowizzid I will check tonight.

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Wed Jul 10, 2019 7:46 pm

Yep, blue light stays on for around 2 seconds after the ignition turned off

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Fri Jul 12, 2019 8:09 am

delcowizzid wrote:Look at the nvram board does the blue light stay on for a couple of seconds after you turn the ignition off

Is that a good sign?

I was looking back through my old posts and hopefully it has just corrupted the NVRAM like it did previously. Now I just got to find my burner.

Cheers

User avatar
Posts: 4978
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: 265 Hemi to efi

Postby delcowizzid » Fri Jul 12, 2019 8:22 am

It means that there's code running on the ecu it's not fully corrupted but it doesn't mean to say that some part of the tune is not right
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Fri Jul 12, 2019 9:26 am

Thanks for the reply, cheers

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Fri Jul 19, 2019 7:48 pm

Good news, my new burner (couldn’t find my old one) turned up today and I was able to burn the stacked bin file to the NVRAM and get TunerPro to find the Hardware. Once TunerPro was connected I was able to load the last tune and it fired up.

Big relief to hear it running again.

Both The burner and laptop will be staying with the car from now on.

User avatar
Posts: 4978
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: 265 Hemi to efi

Postby delcowizzid » Fri Jul 19, 2019 8:08 pm

Always burn a tune to a memcal and leave in the glovebox as a get you home in a pinch backup
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Fri Jul 19, 2019 8:28 pm

delcowizzid wrote:Always burn a tune to a memcal and leave in the glovebox as a get you home in a pinch backup


Thanks, that sounds like a better option than burning on the go

PreviousNext

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 1 guest