265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: 265 Hemi to efi

Post by Holden202T »

yep i second delcowizzids suggestion, put it on a eprom memcal so its pretty much not going to die!
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: 265 Hemi to efi

Post by vlad01 »

I did that and when my NVRAM corrupted my backup eeprom died lol. So I had to recover my NVRAM an hour from home, lucky I had everything with me.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
heff0018
Posts: 888
Joined: Tue Apr 21, 2015 1:42 pm
cars: CL valiant charger, VH valiant charger

Re: 265 Hemi to efi

Post by heff0018 »

Definitely going to burn the bin and tune to a memcal. I have done lot of reading in the FAQ section and have a rough idea of how to burn the bin to the memcal but I am still not exactly sure which is the correct way to save full bin file E.g. OS and CAL. Is this through TunerPro or through Flashtool. Cheers
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 265 Hemi to efi

Post by delcowizzid »

You should be able to do read bin in ose flashtool.i normally just read the nvram in my programmer and split the tune out with tunerpro and Chuck it on a 256k eprom
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: 265 Hemi to efi

Post by vlad01 »

Yeah I use the flash tool, get bin and then burn the bin to a 512k eeprom at 8000 offset and call it done.

Just don't solder the EEPROMs, I found this is what was causing most of mine to fail. They don't like the heat of soldering, at least the ones I have don't. Solder a socket into the memcal and you can then just burn the chip and push them in, that way you don't need an adapter either.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
heff0018
Posts: 888
Joined: Tue Apr 21, 2015 1:42 pm
cars: CL valiant charger, VH valiant charger

Re: 265 Hemi to efi

Post by heff0018 »

Thanks guys, I originally thought that you burnt direct to the Memcal but From what Vlad said above you would need an adaptor for the Memcal.

I found instructions on how to fit a socket to the memcal. do I just buy an EEPROM and socket from Ebay etc. if so does anyone have any recommendations for what to get.

Sorry I am not great with electronics cheers
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: 265 Hemi to efi

Post by Holden202T »

These are some examples of what you want - these are both from the same seller too.

eeproms - https://www.ebay.com.au/itm/301924734582

Sockets - https://www.ebay.com.au/itm/301924729543

i've selected a 512kb eeprom as it will work for any tune then, ie. vr auto needs a 512kb chip.
heff0018
Posts: 888
Joined: Tue Apr 21, 2015 1:42 pm
cars: CL valiant charger, VH valiant charger

Re: 265 Hemi to efi

Post by heff0018 »

Holden202T wrote:These are some examples of what you want - these are both from the same seller too.

eeproms - https://www.ebay.com.au/itm/301924734582

Sockets - https://www.ebay.com.au/itm/301924729543

i've selected a 512kb eeprom as it will work for any tune then, ie. vr auto needs a 512kb chip.
Thanks Sam, that's great. How can it be so cheap, $6 for both with free shipping? on the way

When I was in Perth recently they were charging $12 for a pint of beer in a pub. Does not compute

Cheers
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 265 Hemi to efi

Post by delcowizzid »

That's 6 bucks for 5 of each its nice and cheap
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
heff0018
Posts: 888
Joined: Tue Apr 21, 2015 1:42 pm
cars: CL valiant charger, VH valiant charger

Re: 265 Hemi to efi

Post by heff0018 »

delcowizzid wrote:That's 6 bucks for 5 of each its nice and cheap
Yeah I thought I was seeing things when it was showing 5 items
Post Reply