265 Hemi to efi

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
Posts: 5021
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: 265 Hemi to efi

Postby delcowizzid » Tue Jul 23, 2019 11:01 pm

I buy them in 50 or 100 chip batches love them
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

User avatar
Posts: 9835
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 265 Hemi to efi

Postby Holden202T » Thu Jul 25, 2019 2:25 pm

yeah i figured youd want the one you need and then a few spares, and being they are so cheap its worth getting at least 5 haha

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Sun Aug 04, 2019 8:46 pm

Ignition module crapped itself the other day when I was on the way to the dyno for the final tune. Luckily i had only gone about 1 km from home and was able to turn around and get it home with about 4 stalls and restarts. There was no spark at the plugs, the MSD tested ok and determined the MSD wasn’t getting any signal. Swapped out the module for a spare and it fired up straight away. I drove it for about 30 minutes and no problems. The module is maybe two of three years old but i doubt its done 100 hours. Ebay shite.

User avatar
Posts: 9835
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 265 Hemi to efi

Postby Holden202T » Mon Aug 05, 2019 9:35 am

camira module ?

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Aug 05, 2019 10:29 am

Holden202T wrote:camira module ?

Yes correct and Its hard finding many options for them now. I have tracked down one 'Bosch' unit on eBay but who is to know whether its genuine.

Do you have any suggestions. Cheers

User avatar
Posts: 9835
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: 265 Hemi to efi

Postby Holden202T » Mon Aug 05, 2019 10:59 am

cant you still buy them new ?

i got mine from super cheap auto originally.

User avatar
Posts: 2076
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: 265 Hemi to efi

Postby Biggvl » Mon Aug 05, 2019 11:04 am

Only buy them from large, reputable suppliers, eg: Burson's, Repco, Supershit, etc...

Our local repco has them on the shelf - BIM148 for $82
According to chemistry, alcohol is a solution...

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Aug 05, 2019 1:43 pm

Biggvl wrote:Only buy them from large, reputable suppliers, eg: Burson's, Repco, Supershit, etc...

Our local repco has them on the shelf - BIM148 for $82


Great thanks I was trying to find the code last night. Supercheap auto have the correct Bosch BIM148 unit for $65.

Posts: 1243
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: 265 Hemi to efi

Postby Charlescrown » Mon Aug 05, 2019 3:14 pm

I would check the induced voltage in the primary winding. The MSD might be what killed the module.

Posts: 742
Joined: Tue Apr 21, 2015 1:42 pm

Re: 265 Hemi to efi

Postby heff0018 » Mon Aug 05, 2019 5:27 pm

Charlescrown wrote:I would check the induced voltage in the primary winding. The MSD might be what killed the module.

Thanks Charles, I will ask the dyno guy to check this as it is way beyond my knowledge level. But you are right it does seem like something ended the ignition module's life prematurely unless it was a dud. I was just happy that I could diagnose the fault. Ha

PreviousNext

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 1 guest