VS 5L into 2a Landrover

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VS 5L into 2a Landrover

Post by antus »

dfi is coil pack. im used to 4 cylinder with camira coil, so not used to that plug but I reckon you can pick what it plugs too. Yes wideband will need you to add or move a pin at the ecu end. You should be able to re-use the A/C select wire. There is a tutorial for getting the pins out and moving them. Its a pain - you think you have no chance and its just not happening, then it works.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

Right.
When I picked up the engine it had a manual trans attached to the back of it, so must have been a conversion.
I'm running a C4 auto, so none pf the ecu components that deal with the factory auto will be needed.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VS 5L into 2a Landrover

Post by Dylan »

Good excuse for a good pull down rip out all the auto wiring AC add in a wide band connector you won't regret that. It can be a pain getting them into the vehicle at times.
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

Yea it seems there is a lot that is in the loom but not required.
As long as I get power to the ECU, have all the sensors on the engine and injectors connected, it should be sweet right?
Do the injectors have their own relay?
I have seen one on the diagram but doesn't seem to be one on the loom.

m
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VS 5L into 2a Landrover

Post by Dylan »

Fed from the body loom. It all makes since once it's opened up.
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

Ok,
I'll start to open it all up now and see how we go.

m
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

Also, the ignition module.
I don't seem to have one?

m
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VS 5L into 2a Landrover

Post by antus »

What does that long black plug - second connector after the firewall bung and near the map sensor connect to on your engine? Its probably on the engine at the moment, and that'll be it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

No there is nothing like that attached to the engine, nor in the collection of components I pulled off the engine before I rebuilt it.
Guessing I'm going to need one of those?

m
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VS 5L into 2a Landrover

Post by Dylan »

Don't have a module or no wiring on the loom for it?
Post Reply