VS 5L into 2a Landrover

Converting To Delco ECU From Carby Or Other Injection Systems
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

A module, the wire is there is nothing here for it to connect to, so I can only assume I don't have one
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

m
m
I also have this that I'm not sure what it is.
I found the plug for it too.

m
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

IMG_2982.JPG
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

Map sensor. got it.
Still nothing on the ignition module
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: VS 5L into 2a Landrover

Post by Dylan »

You'll need one, out a wanted post on here somebody might have spare one. Hundreds around but they can be hard to get a good one. They hate moisture and heat, engine was a wise split to out then by GM. Great for spare parts sales anyway.
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

Ok, I'll pop a wanted ad out and see what happens.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VS 5L into 2a Landrover

Post by antus »

theres a few sellers, some as is, some reconditioned on gumtree at the moment too. https://www.gumtree.com.au/s-v8+ignition+module/k0
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Dazza92VP
Posts: 607
Joined: Sun Jun 06, 2010 9:59 am
cars: 92 VP V8 Wagon
Location: Perth

Re: VS 5L into 2a Landrover

Post by Dazza92VP »

I can prob give you a hand some time if you want drop around after work of something
67panel
Posts: 46
Joined: Fri Aug 21, 2015 11:20 am
cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon

Re: VS 5L into 2a Landrover

Post by 67panel »

Yea that could be the go.
I'm guessing once you deliver power to the unit from the ignition side of the key, the rest should work independent of the vehicles wiring loom?

m
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VS 5L into 2a Landrover

Post by antus »

There are EFI and Fuel pump relays that feed in to the loom you have, but all the power flows through there. The JE camira / n13 pulsar looms have a nice little 2 fuse/2 relay box which is great for this, but you could use anything.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply