VS 5L into 2a Landrover
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VS 5L into 2a Landrover
dfi is coil pack. im used to 4 cylinder with camira coil, so not used to that plug but I reckon you can pick what it plugs too. Yes wideband will need you to add or move a pin at the ecu end. You should be able to re-use the A/C select wire. There is a tutorial for getting the pins out and moving them. Its a pain - you think you have no chance and its just not happening, then it works.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 46
- Joined: Fri Aug 21, 2015 11:20 am
- cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon
Re: VS 5L into 2a Landrover
Right.
When I picked up the engine it had a manual trans attached to the back of it, so must have been a conversion.
I'm running a C4 auto, so none pf the ecu components that deal with the factory auto will be needed.
When I picked up the engine it had a manual trans attached to the back of it, so must have been a conversion.
I'm running a C4 auto, so none pf the ecu components that deal with the factory auto will be needed.
Re: VS 5L into 2a Landrover
Good excuse for a good pull down rip out all the auto wiring AC add in a wide band connector you won't regret that. It can be a pain getting them into the vehicle at times.
-
- Posts: 46
- Joined: Fri Aug 21, 2015 11:20 am
- cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon
Re: VS 5L into 2a Landrover
Yea it seems there is a lot that is in the loom but not required.
As long as I get power to the ECU, have all the sensors on the engine and injectors connected, it should be sweet right?
Do the injectors have their own relay?
I have seen one on the diagram but doesn't seem to be one on the loom.
m
As long as I get power to the ECU, have all the sensors on the engine and injectors connected, it should be sweet right?
Do the injectors have their own relay?
I have seen one on the diagram but doesn't seem to be one on the loom.
m
Re: VS 5L into 2a Landrover
Fed from the body loom. It all makes since once it's opened up.
-
- Posts: 46
- Joined: Fri Aug 21, 2015 11:20 am
- cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon
Re: VS 5L into 2a Landrover
Ok,
I'll start to open it all up now and see how we go.
m
I'll start to open it all up now and see how we go.
m
-
- Posts: 46
- Joined: Fri Aug 21, 2015 11:20 am
- cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon
Re: VS 5L into 2a Landrover
Also, the ignition module.
I don't seem to have one?
m
I don't seem to have one?
m
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VS 5L into 2a Landrover
What does that long black plug - second connector after the firewall bung and near the map sensor connect to on your engine? Its probably on the engine at the moment, and that'll be it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 46
- Joined: Fri Aug 21, 2015 11:20 am
- cars: 68 SWB Series 2a Landrover
00 Defender 130 Dual Cab
63 VW Type 3
55 VW Kombi
63 Holden EH Wagon
Re: VS 5L into 2a Landrover
No there is nothing like that attached to the engine, nor in the collection of components I pulled off the engine before I rebuilt it.
Guessing I'm going to need one of those?
m
Guessing I'm going to need one of those?
m
Re: VS 5L into 2a Landrover
Don't have a module or no wiring on the loom for it?