Delco 808 conversion on Black 202 in a HR

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Delco 808 conversion on Black 202 in a HR

Post by Holden202T »

its fine if you use it on a VS TB as its the right rotation for the sensor! its only a problem if you put a VS one on another TB!
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

Re: Delco 808 conversion on Black 202 in a HR

Post by MAGP »

I don't know about the VN to VS TPS but certainly the VS V6 is different to the V8.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Delco 808 conversion on Black 202 in a HR

Post by Holden202T »

yeah talking about ecotec v6 TB, the vn-vr v6/8 and vs v8 are all the same.
benneth
Posts: 7
Joined: Wed Jul 06, 2011 12:40 am
cars: HR

Re: Delco 808 conversion on Black 202 in a HR

Post by benneth »

Cheers guys. I picked up a throttle body from a VT yesterday as they are the same as the VS, and it looked like it hadn't been sitting for too long. Also got the ignition gear off an N13 pulsar. Trips to the wreckers are fun! :D
Also for those blokes who are in brisbane the capalaba pick n pull wrecking yard is closing soon in the next couple of months, so get in whilst you can.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Delco 808 conversion on Black 202 in a HR

Post by Dylan »

Good time to upgrade to a crank trigger and LS coils I say.
benneth
Posts: 7
Joined: Wed Jul 06, 2011 12:40 am
cars: HR

Re: Delco 808 conversion on Black 202 in a HR

Post by benneth »

Hey Holden202T, when fitting the MAT sensor (where the egr valve is) how did you rip out the egr pipe in the manifold? did you use a dremel or does it come out if you give it a tap and some force?
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Delco 808 conversion on Black 202 in a HR

Post by Holden202T »

Pretty sure I just drilled it out till I was through the pipe and into the alloy, but I can't remember the size needed for tapping the thread
HD202efi
Posts: 1
Joined: Tue Aug 02, 2016 9:18 pm
cars: Hd Special

Re: Delco 808 conversion on Black 202 in a HR

Post by HD202efi »

Just starting a HD build, got a low k EFI 202 in great nic, would like to change from trimatic to 4 speed, just having issue locating JE Camira harness
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Delco 808 conversion on Black 202 in a HR

Post by Holden202T »

you don't actually need a JE loom, you can use a VN/VP V6 commodore loom and just modify it to suit, but the JE loom is less work if you can find one.
Post Reply