Bosch 931 injector Info

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Bosch 931 injector Info

Post by The1 »

This is data generated on my own flow bench using vs v6 pcm and a 931 injector
Hof360
Posts: 33
Joined: Fri Sep 08, 2017 6:32 pm
cars: VG Valiant Hardtop 360 EFI (currently Kalmaker) possibly about to make the jump to 12P
Location: South Australia

Re: Bosch 931 injector Info

Post by Hof360 »

Thanks The1. Ill plug that data in before my next data logging run.

Just need to decide on the fuel pressure to run, I currently have it set at a static 3.5 bar but under idle and good low load conditions the FPR pulls that down to 3.0 - 3.1 bar, I probably need that 3.5 under running conditions?
Suggestions?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Bosch 931 injector Info

Post by The1 »

3.5 would be ideal
Post Reply