Help with speed sensor conversion

Converting To Delco ECU From Carby Or Other Injection Systems
Post Reply
Humptydumpty
Posts: 58
Joined: Fri May 10, 2019 12:11 pm
cars: Toyota Bundera, Sr Hilux, Hilux workmate.
Location: Sydney

Help with speed sensor conversion

Post by Humptydumpty »

Ledgends,

I need help setting up a speed sensor on my Bundera - it’s got a 304 with a vp ecu n loom

I need to fit a speed sensor onto cable drive off Toyota gearbox.

I was told I needed to find out how many pulses I needed for the VP ecu?

Can anyone confirm this for me please? Am I on the right track?

Also does the vp setup require 3 wires for speed sensor???

Thanks :thumbup:
Humptydumpty
Posts: 58
Joined: Fri May 10, 2019 12:11 pm
cars: Toyota Bundera, Sr Hilux, Hilux workmate.
Location: Sydney

Re: Help with speed sensor conversion

Post by Humptydumpty »

https://www.aussiev8.com.au/conversions ... o-rqd.html

This is what I’m talking about.. do I need to convert the signal to suit the vp ecu?
Humptydumpty
Posts: 58
Joined: Fri May 10, 2019 12:11 pm
cars: Toyota Bundera, Sr Hilux, Hilux workmate.
Location: Sydney

Re: Help with speed sensor conversion

Post by Humptydumpty »

User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Help with speed sensor conversion

Post by Holden202T »

that sensor should be fine, you can adjust the pulses per km in the tune to suit the differences in your driveline.
OZ38
Posts: 288
Joined: Wed Jul 01, 2009 7:18 pm
cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.

Re: Help with speed sensor conversion

Post by OZ38 »

I used a Marks 4WD Adapter VSS convertor on a cable speedo 1990 Hilux running a GMH V6 & VT ECU.
From memory it was pretty easy to set up. Was just scanning with Tuner Pro & adjust their box until the Cable speedo reading & the VSS readout on the TP where very close to one another.
Humptydumpty
Posts: 58
Joined: Fri May 10, 2019 12:11 pm
cars: Toyota Bundera, Sr Hilux, Hilux workmate.
Location: Sydney

Re: Help with speed sensor conversion

Post by Humptydumpty »

Hey guys,
Thanks for the info and also what colour wire is the speed sensor and is nxt to diagnostic plug or the one further along the loom where the thermo fan switch wires n that come out?
Cheers :thumbup:
hot308vb
Posts: 77
Joined: Fri Jul 02, 2010 8:53 pm
cars: Vt v6 Berlina daily driver
vs clubsport high comp solid cammed 355 brass buttoned t56 6 speed 4.11 diff
Location: Seymour, Vic

Re: Help with speed sensor conversion

Post by hot308vb »

Hey humpty if you're interested I have a brand new custom made 1foot long speedo cable to suit supra 5speed to Commodore manual speed sensor that I brought to use but changed direction.
I can post it to you for $80 if you want it?
Post Reply