Help needed! converting 202 to delco

Converting To Delco ECU From Carby Or Other Injection Systems
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Help needed! converting 202 to delco

Post by Holden202T »

make sure you configure the wideband 0v and 5v settings in the tune to match the widebands analog output.
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 7:47 pm
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

v6bucket wrote:Are you using a manual or auto trans?
Manual
Shake N Bake!
v6bucket
Posts: 761
Joined: Tue Jul 21, 2009 10:02 am

Re: Help needed! converting 202 to delco

Post by v6bucket »

I know I said that you may need a VSS, but my HJ ute with manual & 202 is working ok.
20210919_121059.jpg
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 7:47 pm
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

v6bucket wrote:I know I said that you may need a VSS, but my HJ ute with manual & 202 is working ok.
The attachment 20210919_121059.jpg is no longer available
I took mine for a test drive today. It’s burning a bit of oil which is messing with the o2 readings a bit but otherwise ran great. Now time for tuning!
Attachments
7AD0C847-3B59-48D8-A9B4-5C88FFDAE317.jpeg
Shake N Bake!
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Help needed! converting 202 to delco

Post by Holden202T »

good to hear your getting it sorted!
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 7:47 pm
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

Holden202T wrote:good to hear your getting it sorted!
thank you! Thanks for the help everyone. Ill still be posting if i have some smaller issues.
Shake N Bake!
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 7:47 pm
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

im back, just wondering how to set the transmission to 'manual' in the adx
Shake N Bake!
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Help needed! converting 202 to delco

Post by vlad01 »

According to one of my wiring diagrams B10 is grounded to tell the ECU it's manual
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
Elijah Bruce
Posts: 63
Joined: Fri Jun 25, 2021 7:47 pm
cars: 1975 Holden Kingswood Utility

Re: Help needed! converting 202 to delco

Post by Elijah Bruce »

vlad01 wrote:According to one of my wiring diagrams B10 is grounded to tell the ECU it's manual
i will have to check my grounds, but the live readout in tunerpro is registering that it is an auto when im 99% sure that B10 is grounded
Shake N Bake!
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Help needed! converting 202 to delco

Post by Holden202T »

if its an auto its only grounded in park and neutral, if its grounded all the time its a manual ... it wouldnt be done unless you did it.
Post Reply