Looking for Info

Converting To Delco ECU From Carby Or Other Injection Systems
Post Reply
Handy Andy
Posts: 8
Joined: Tue May 10, 2022 2:37 pm
cars: VX Commodore

Looking for Info

Post by Handy Andy »

Hi all,
This images are of an ECU from an N13 Nissan Pulsar (1987 to 1990).

I'm looking for information it.
Board Top.JPEG
Board Bottom
Board Bottom
Can anyone assist.

Thanks in advance
Charlescrown
Posts: 1831
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: Looking for Info

Post by Charlescrown »

Yea it's an 808 with a 4 cyl 1.8 PFI memcal.
Handy Andy
Posts: 8
Joined: Tue May 10, 2022 2:37 pm
cars: VX Commodore

Re: Looking for Info

Post by Handy Andy »

Charlescrown wrote:Yea it's an 808 with a 4 cyl 1.8 PFI memcal.
Thanks for that

My background is Electronics, not cars.
Sometimes these cross my workbench.
User avatar
charlay86
Posts: 584
Joined: Thu Sep 17, 2009 2:00 pm
cars: VT S1 SS (L67)
Location: Perth, WA

Re: Looking for Info

Post by charlay86 »

These were also fitted to Holden commodores of the same era.
We have a suite of custom software ("OSE 12P") and various tools and hardware available here (pcmhacking.net) to tune these ECMs and/or adapt then for other vehicles. That hardware is probably the main reason these forums exist.
Handy Andy
Posts: 8
Joined: Tue May 10, 2022 2:37 pm
cars: VX Commodore

Re: Looking for Info

Post by Handy Andy »

charlay86 wrote:These were also fitted to Holden commodores of the same era.
We have a suite of custom software ("OSE 12P") and various tools and hardware available here (pcmhacking.net) to tune these ECMs and/or adapt then for other vehicles. That hardware is probably the main reason these forums exist.
I've wandered around the forums a bit, found out a lot. Thanks.
Post Reply