Tinkers Rides rb30 to delco

Post Your Delco Powered Ride Here
Posts: 425
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: Tinkers Rides rb30 to delco

Postby In-Tech » Fri Sep 10, 2021 3:25 am

I want to check it out :wall: :comp:
I'll try on a newer 'puter :mrgreen:
Banned from pcmhacking.JPG

Posts: 65
Joined: Sat Feb 13, 2010 12:37 pm

Re: Tinkers Rides rb30 to delco

Postby Tinker » Fri Sep 10, 2021 6:33 pm

LOL, Its just a iphone video i dont think its anything special.

User avatar
Posts: 7064
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: Tinkers Rides rb30 to delco

Postby vlad01 » Fri Sep 10, 2021 8:01 pm

I have problems with iphone videos on firefox. Try chrome or another browser, should work then.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

Posts: 65
Joined: Sat Feb 13, 2010 12:37 pm

Re: Tinkers Rides rb30 to delco

Postby Tinker » Thu Sep 16, 2021 8:28 pm

Looking for EFI plugs, anyone have a good reference ? Looked at www.efihardware.com CAS plug $18 bucks . is that a good price?

Posts: 65
Joined: Sat Feb 13, 2010 12:37 pm

Re: Tinkers Rides rb30 to delco

Postby Tinker » Tue Sep 21, 2021 10:08 pm

dizzy sensor.jpg
dizzy sensor.jpg (322.22 KiB) Viewed 421 times


OK so going back to the dizzy after opening up the photo interrupter housing you can see how the beams are setup .There is a alloy cover plate( hard to get good pic) that goes over the photo transistor the center is a single slot smack in the middle (inner ring) the outer has 3 slightly smaller slots about 10deg from center.

IMG_0778.JPG



Not sure if outer ring with the three slots is going to work as good as the single slot for the inner ring .The delco ign module is looking for number of transitions of (18x) when the 3X goes low. I think I'll have to test and see. Still waiting for new CAS plug so I can get it wired up on the bench.

Preferably I would have liked 2 single slots for both....and this housing is not made to come apart easy .
Attachments
IMG_0784.JPG

Posts: 65
Joined: Sat Feb 13, 2010 12:37 pm

Re: Tinkers Rides rb30 to delco

Postby Tinker » Wed Nov 24, 2021 8:58 pm

Ok So I have redone my chopper disc so the 18x is on the inner track (single slot for beam) and the 3x sync on the outer track (3 slots for beam) . The 18x is the more important as the 3x doesn’t get used after sync. Well that’s the what I’m thinking.

I am looking for cheap logic analyzer off eBay .https://www.ebay.com.au/itm/38444178897 ... SwvVJhZN8F
anyone use this ? or have something else they can recommend?

I would like to see how close my sync pattern is . It must be in the ball park ignition module fires the coils

IMG_0838.JPG


Got a couple of vids of it working..


https://drive.google.com/file/d/1RcWKWG ... sp=sharing
https://drive.google.com/file/d/1-jg_-k ... sp=sharing

Previous

Return to Members Rides

Who is online

Users browsing this forum: No registered users and 2 guests